The PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT).
Overview
Finding ID
Version
Rule ID
IA Controls
Severity
V-207177
SRG-NET-000512-RTR-000006
SV-207177r604135_rule
High
Description
The primary security model for an MPLS L3VPN as well as a VRF-lite infrastructure is traffic separation. Each interface can only be associated to one VRF, which is the fundamental framework for traffic separation. Forwarding decisions are made based on the routing table belonging to the VRF. Control of what routes are imported into or exported from a VRF is based on the RT. It is critical that traffic does not leak from one COI tenant or L3VPN to another; hence, it is imperative that the correct RT is configured for each VRF.
Verify that the correct RT is configured for each VRF.
Review the design plan for MPLS/L3VPN and VRF-lite to determine what RTs have been assigned for each VRF.
Review the route-target import, route-target, or route-target export statements under each configured VRF and verify that the correct RTs have been defined for each VRF.
Note: Import and export route-maps are normally used when finer granularity is required.
If there are VRFs configured with the wrong RT, this is a finding.
Fix Text (F-7438r382620_fix)
Configure all J-PE routers to have the correct VRF defined with the appropriate RT.