The DataPower Gateway must use automated mechanisms to alert security personnel to threats identified by authoritative sources (e.g., CTOs) and in accordance with CJCSM 6510.01B.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
| V-65173 | WSDP-NM-000131 | SV-79663r1_rule | CCI-000366 | medium |
| Description | ||||
| By immediately displaying an alarm message, potential security violations can be identified more quickly even when administrators are not logged into the network device. An example of a mechanism to facilitate this would be through the utilization of SNMP traps. | ||||
| STIG | Date | |||
| IBM DataPower Network Device Management Security Technical Implementation Guide | 2017-10-05 | |||
Details
Check Text (C-79663r1_chk)
Go to Administration >> Access >> SNMP Settings. Verify the IP address, port, and security settings. Go to the Trap and Notification Targets tab. Verify the remote server/receiver information. If these values have not been set, this is a finding.
Fix Text (F-71113r1_fix)
Go to Administration >> Access >> SNMP Settings. Configure the IP address, port, and security settings.
Go to the Trap and Notification Targets tab. Enter the remote server/receiver information.