WebSphere MQ channel security must be implemented in accordance with security requirements.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-6958	ZWMQ0011	SV-7259r6_rule		High

Description

WebSphere MQ Channel security can be configured to provide authentication, message privacy, and message integrity between queue managers. Secure Sockets Layer (SSL) uses encryption techniques, digital signatures and digital certificates to provide message privacy, message integrity and mutual authentication between clients and servers. Failure to properly secure a WebSphere MQ channel may lead to unauthorized access. This exposure could compromise the availability, integrity, and confidentiality of some system services, applications, and customer data.

STIG	Date
zOS WebsphereMQ for TSS STIG	2020-06-25

Details

Check Text ( C-19819r3_chk )

Refer to the following report produced by the z/OS Data Collection: - MQSRPT(ssid) NOTE: ssid is the queue manager name (a.k.a., subsystem identifier). Collect the following Information for Websphere MQ and MQSeries queue manager. - If a WebSphere MQ queue manager communicates with a MQSeries queue manager, provide the WebSphere MQ queue manager and channel names used to connect with MQSeries. - If any WebSphere MQ channels are used to communicate within the enclave, provide a list of channels and provide documentation regarding the sensitivity of the information on the channel. Automated Analysis requires Additional Analysis. Automated Analysis Refer to the following report produced by the z/OS Data Collection: - PDI(ZWMQ0011) If the communication lines are controlled by a VPN and are not available in the clear at any point outside the enclave, than this is acceptable and can override the requirement to use SSL. If this is true, this is not a finding. If the following guidelines are true for each channel definition displayed from the DISPLAY CHANNEL command, this is not a finding. ___ Verify that each WebSphere MQ channel is using SSL by checking for the SSLCIPH parameter, which must specify a FIPS 140-2 compliant value of the following: (Note: Both ends of the channel must specify the same cipher specification.) ECDHE_ECDSA_AES_128_CBC_SHA256 ECDHE_ECDSA_AES_256_CBC_SHA384 ECDHE_RSA_AES_128_CBC_SHA256 ECDHE_RSA_AES_256_CBC_SHA384 TLS_RSA_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_AES_128_CBC_SHA256 TLS_RSA_WITH_AES_256_CBC_SHA TLS_RSA_WITH_AES_256_CBC_SHA256 ___ Repeat the above step for each queue manager ssid identified.

Fix Text (F-18959r2_fix)

The system programmer and the IAO will review the WebSphere MQ Screen interface invoked by the REXX CSQOREXX. Reviewing the channel’s SSLCIPH setting. Display the channel properties and look for the "SSL Cipher Specification" value. Ensure that a FIPS 140-2 compliant value is shown. ECDHE_ECDSA_AES_128_CBC_SHA256 ECDHE_ECDSA_AES_256_CBC_SHA384 ECDHE_RSA_AES_128_CBC_SHA256 ECDHE_RSA_AES_256_CBC_SHA384 TLS_RSA_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_AES_128_CBC_SHA256 TLS_RSA_WITH_AES_256_CBC_SHA TLS_RSA_WITH_AES_256_CBC_SHA256 Note that both ends of the channel must specify the same cipher specification. Repeat these steps for each queue manager ssid identified.