IBM System Display and Search Facility (SDSF) resources will be properly defined and protected.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-224507	ZISFR020	SV-224507r836687_rule		Medium

Description
IBM System Display and Search Facility (SDSF) can run with sensitive system privileges, and potentially can circumvent system controls. Failure to properly control access to product resources could result in the compromise of the operating system environment, and compromise the confidentiality of customer data. Many utilities assign resource controls that can be granted to system programmers only in greater than read authority. Resources are also granted to certain non systems personnel with read only authority.

Description

IBM System Display and Search Facility (SDSF) can run with sensitive system privileges, and potentially can circumvent system controls. Failure to properly control access to product resources could result in the compromise of the operating system environment, and compromise the confidentiality of customer data. Many utilities assign resource controls that can be granted to system programmers only in greater than read authority. Resources are also granted to certain non systems personnel with read only authority.

STIG	Date
z/OS IBM System Display and Search Facility (SDSF) for RACF Security Technical Implementation Guide	2022-06-27

Details

Check Text ( C-26190r836685_chk )
Refer to the following report produced by the Data Set and Resource Data Collection: - SENSITVE.RPT(ZISF0020) Automated Analysis requiring additional analysis. Refer to the following report produced by the Data Set and Resource Data Collection: - PDI(ZISF0020) Ensure that all IBM System Display and Search Facility (SDSF) resources are properly protected according to the requirements specified in the Site Security Plan (SSP). The plan should be based on the SDSF SAF Resources table in the z/OS STIG Addendum and validated by the site ISSO. If this and the following guidance is true, this is not a finding. ___ The RACF resources and/or generic equivalent as designated in the above table are defined with a default access of NONE. ___ The RACF resource access authorizations restrict access to the appropriate personnel as designated in the above table. ___ The RACF resource logging is specified as designated in the above table. ___ The RACF resource access authorizations are defined with UACC(NONE) and NOWARNING. ___ The RACF resource access authorizations for SDSF GROUP.group-name will require additional analysis to justify access.

Check Text ( C-26190r836685_chk )

Refer to the following report produced by the Data Set and Resource Data Collection:

- SENSITVE.RPT(ZISF0020)

Automated Analysis requiring additional analysis.
Refer to the following report produced by the Data Set and Resource Data Collection:

- PDI(ZISF0020)

Ensure that all IBM System Display and Search Facility (SDSF) resources are properly protected according to the requirements specified in the Site Security Plan (SSP). The plan should be based on the SDSF SAF Resources table in the z/OS STIG Addendum and validated by the site ISSO. If this and the following guidance is true, this is not a finding.

___ The RACF resources and/or generic equivalent as designated in the above table are defined with a default access of NONE.

___ The RACF resource access authorizations restrict access to the appropriate personnel as designated in the above table.

___ The RACF resource logging is specified as designated in the above table.

___ The RACF resource access authorizations are defined with UACC(NONE) and NOWARNING.

___ The RACF resource access authorizations for SDSF GROUP.group-name will require additional analysis to justify access.

Fix Text (F-26178r836686_fix)
The IAO will work with the systems programmer to verify that the following are properly specified in the ACP. (Note: The resource class, resources, and/or resource prefixes identified below are examples of a possible installation. The actual resource class, resources, and/or prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site-specific.) Ensure that all IBM System Display and Search Facility (SDSF) resources are properly protected according to the requirements specified in the Site Security Plan (SSP). The plan should be based on the SDSF SAF Resources table in the z/OS STIG Addendum and validated by the site ISSO. Use SDSF SAF Resources and SDSF SAF Resource Descriptions tables in the zOS STIG Addendum/SSP. These tables list the resources and access requirements for IBM System Display and Search Facility (SDSF); ensure the following guidelines are followed: The RACF resources and/or generic equivalent as designated in the above table are defined with a default access of NONE. The RACF resource access authorizations restrict access to the appropriate personnel as designated in the above table. The RACF resource logging is specified as designated in the above table. The RACF resource access authorizations for the resources designated in the above table specify UACC(NONE) and NOWARNING. The RACF resource access authorizations for SDSF GROUP.group-name will require additional analysis to justify access. The following commands are provided as a sample for implementing resource controls: RDEFINE SDSF ISFATTR.JOBCL. UACC(NONE) OWNER(ADMIN) AUDIT(FAILURE(READ)) PERMIT ISFATTR.JOBCL. CLASS(SDSF) ACCESS(UPDATE) ID(operaudt) PERMIT ISFATTR.JOBCL.** CLASS(SDSF) ACCESS(UPDATE) ID(syspaudt)

Fix Text (F-26178r836686_fix)

The IAO will work with the systems programmer to verify that the following are properly specified in the ACP.

(Note: The resource class, resources, and/or resource prefixes identified below are examples of a possible installation. The actual resource class, resources, and/or prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site-specific.)

Ensure that all IBM System Display and Search Facility (SDSF) resources are properly protected according to the requirements specified in the Site Security Plan (SSP). The plan should be based on the SDSF SAF Resources table in the z/OS STIG Addendum and validated by the site ISSO.

Use SDSF SAF Resources and SDSF SAF Resource Descriptions tables in the zOS STIG Addendum/SSP. These tables list the resources and access requirements for IBM System Display and Search Facility (SDSF); ensure the following guidelines are followed:

The RACF resources and/or generic equivalent as designated in the above table are defined with a default access of NONE.

The RACF resource access authorizations restrict access to the appropriate personnel as designated in the above table.

The RACF resource logging is specified as designated in the above table.

The RACF resource access authorizations for the resources designated in the above table specify UACC(NONE) and NOWARNING.

The RACF resource access authorizations for SDSF GROUP.group-name will require additional analysis to justify access.

The following commands are provided as a sample for implementing resource controls:

RDEFINE SDSF ISFATTR.JOBCL.** UACC(NONE) OWNER(ADMIN) AUDIT(FAILURE(READ))
PERMIT ISFATTR.JOBCL.** CLASS(SDSF) ACCESS(UPDATE) ID(operaudt)
PERMIT ISFATTR.JOBCL.** CLASS(SDSF) ACCESS(UPDATE) ID(syspaudt)