Compuware Abend-AID resources will be properly defined and protected.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-17947	ZAIDA020	SV-44084r1_rule	ECCD-1 ECCD-2	Medium

Description
Compuware Abend-AID can run with sensitive system privileges, and potentially can circumvent system controls. Failure to properly control access to product resources could result in the compromise of the operating system environment, and compromise the confidentiality of customer data. Many utilities assign resource controls that can be granted to system programmers only in greater than read authority. Resources are also granted to certain non systems personnel with read only authority.

Description

Compuware Abend-AID can run with sensitive system privileges, and potentially can circumvent system controls. Failure to properly control access to product resources could result in the compromise of the operating system environment, and compromise the confidentiality of customer data. Many utilities assign resource controls that can be granted to system programmers only in greater than read authority. Resources are also granted to certain non systems personnel with read only authority.

STIG	Date
z/OS Compuware Abend-AID for ACF2 STIG	2015-01-15

Details

Check Text ( C-11662r4_chk )
Refer to the following report produced by the ACF2 Data Collection and Data Set and Resource Data Collection: SENSITVE.RPT(ZAID0020) - ACF2CMDS.RPT(RESOURCE) – Alternate report Automated Analysis Refer to the following report produced by the Data Set and Resource Data Collection: - PDI(ZAID0020) NOTE: The Abend-AID resource class is identified in the Viewer Server’s STC configuration data set, FDBDPARM DD statement, using the parameter setting EXTERNAL_SECURITY_RESOURCE_CLASS. Verify that the accesses to resources and/or generic equivalent are properly restricted according to the requirements specified in Compuware Abend-AID Resources table in the z/OS STIG Addendum. If the following guidance is true, this is not a finding. ___ The ACF2 resources are defined with a default access of PREVENT. ___ The ACF2 resource access authorizations restrict access to the appropriate personnel.

Check Text ( C-11662r4_chk )

Refer to the following report produced by the ACF2 Data Collection and Data Set and Resource Data Collection:

SENSITVE.RPT(ZAID0020)
- ACF2CMDS.RPT(RESOURCE) – Alternate report

Automated Analysis
Refer to the following report produced by the Data Set and Resource Data Collection:

- PDI(ZAID0020)

NOTE: The Abend-AID resource class is identified in the Viewer Server’s STC configuration data set, FDBDPARM DD statement, using the parameter setting EXTERNAL_SECURITY_RESOURCE_CLASS.

Verify that the accesses to resources and/or generic equivalent are properly restricted according to the requirements specified in Compuware Abend-AID Resources table in the z/OS STIG Addendum. If the following guidance is true, this is not a finding.

___ The ACF2 resources are defined with a default access of PREVENT.

___ The ACF2 resource access authorizations restrict access to the appropriate personnel.

Fix Text (F-6616r2_fix)
The IAO will work with the systems programmer to verify that the following are properly specified in the ACP. (Note: The resources and/or resource prefixes identified below are examples of a possible installation. The actual resources and/or prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site specific.) Use Compuware Abend-AID Resources and Compuware Abend-AID Resources Descriptions tables in the zOS STIG Addendum. These tables list the resources, access requirements, and logging requirement for Compuware Abend-AID. Ensure the guidelines for the resources and/or generic equivalent specified in the z/OS STIG Addendum are followed. Note: The Compuware Abend-AID resource class is identified in the Viewer Server’s STC configuration data set, FDBDPARM DD statement, using the parameter setting EXTERNAL_SECURITY_RESOURCE_CLASS. In addition there is a parameter that identifies the prefix for all resources which is EXTERNAL_SECURITY_PREFIX. The ACF2 resources as designated in the above table are defined with a default access of PREVENT. The ACF2 resource access authorizations restrict access to the appropriate personnel as designated in the above table. The following commands are provided as a sample for implementing resource controls: $KEY(prefix) TYPE(resource-type) SERVER.LOGON.FD.- UID(appdaudt) ALLOW SERVER.LOGON.FD.- UID(appsaudt) ALLOW SERVER.LOGON.FD.- UID(operaudt) ALLOW SERVER.LOGON.FD.- UID(syspaudt) ALLOW - UID(*) PREVENT

Fix Text (F-6616r2_fix)

The IAO will work with the systems programmer to verify that the following are properly specified in the ACP.

(Note: The resources and/or resource prefixes identified below are examples of a possible installation. The actual resources and/or prefixes are determined when the product is actually installed on a system through the product’s installation guide and can be site specific.)

Use Compuware Abend-AID Resources and Compuware Abend-AID Resources Descriptions tables in the zOS STIG Addendum. These tables list the resources, access requirements, and logging requirement for Compuware Abend-AID. Ensure the guidelines for the resources and/or generic equivalent specified in the z/OS STIG Addendum are followed.

Note: The Compuware Abend-AID resource class is identified in the Viewer Server’s STC configuration data set, FDBDPARM DD statement, using the parameter setting EXTERNAL_SECURITY_RESOURCE_CLASS. In addition there is a parameter that identifies the prefix for all resources which is EXTERNAL_SECURITY_PREFIX.

The ACF2 resources as designated in the above table are defined with a default access of PREVENT.

The ACF2 resource access authorizations restrict access to the appropriate personnel as designated in the above table.

The following commands are provided as a sample for implementing resource controls:

$KEY(prefix) TYPE(resource-type)
SERVER.LOGON.FD.- UID(appdaudt) ALLOW
SERVER.LOGON.FD.- UID(appsaudt) ALLOW
SERVER.LOGON.FD.- UID(operaudt) ALLOW
SERVER.LOGON.FD.- UID(syspaudt) ALLOW
- UID(*) PREVENT