Procedures are not in place to ensure all LOGONIDs with the READALL attribute are used and controlled.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-175	ACF0790	SV-175r2_rule	DCCS-1 DCCS-2	Medium

Description
READALL allows the individual to view any file and violates the principle of least privilege. This could result in the compromise of the confidentiality of customer data.

STIG	Date
z/OS ACF2 STIG	2016-01-04

Details

Check Text ( C-269r1_chk )
a) Refer to the following report produced by the ACF2 Data Collection: - ACF2CMDS.RPT(ATTREDAL) b) If procedures are in place to ensure logonids with the READALL attribute are used and controlled in accordance with the DISA requirements, there is NO FINDING. c) If procedures are not in place to ensure logonids with the READALL attribute are used and controlled in accordance with the DISA requirements, this is a FINDING.

Check Text ( C-269r1_chk )

a) Refer to the following report produced by the ACF2 Data Collection:

- ACF2CMDS.RPT(ATTREDAL)

b) If procedures are in place to ensure logonids with the READALL attribute are used and controlled in accordance with the DISA requirements, there is NO FINDING.

c) If procedures are not in place to ensure logonids with the READALL attribute are used and controlled in accordance with the DISA requirements, this is a FINDING.

Fix Text (F-17071r1_fix)
The IAO will ensure that procedures are in place to control Logonids with the READALL attribute. The READALL privilege is available for actual auditing of system data. It gives the capability of looking at every data set on the system despite the data set rules. Its use is strongly discouraged. Always grant access through the use of standard data set access rules. Under no circumstances will the privilege be used as a convenience to the person maintaining the rule sets. Only use this privilege when absolutely necessary, and only give it to auditors. Remove the privilege once the audit is complete. Fully document the granting and revoking of the access.

Fix Text (F-17071r1_fix)

The IAO will ensure that procedures are in place to control Logonids with the READALL attribute.

The READALL privilege is available for actual auditing of system data. It gives the capability of looking at every data set on the system despite the data set rules. Its use is strongly discouraged. Always grant access through the use of standard data set access rules. Under no circumstances will the privilege be used as a convenience to the person maintaining the rule sets. Only use this privilege when absolutely necessary, and only give it to auditors. Remove the privilege once the audit is complete. Fully document the granting and revoking of the access.