The password configured on the WLAN Access Point for key generation and client access must be set to a 14 character or longer complex password as required by USCYBERCOM CTO 07-15Rev1.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-25316	WIR0122	SV-31427r2_rule	IAIA-1	Medium

Description
If the organization does not use a strong passcode for client access, then it is significantly more likely that an adversary will be able to obtain it. Once this occurs, the adversary may be able to obtain full network access, obtain DoD sensitive information, and attack other DoD information systems.

STIG	Date
WLAN Access Point (Internet Gateway Only Connection) Security Technical Implementation Guide	2011-10-07

Details

Check Text ( C-31751r2_chk )
This check only applies to access points that do not use a AAA (RADIUS) server for authentication services. In most cases, this means the access point is configured for WPA2 (Personal), which relies on password authentication, and not WPA2 (Enterprise) which uses a AAA server to authenticate each user based on that user’s authentication credentials. Verify the client authentication password has been set on the access point with the following settings: -14 characters or longer. -The authentication password selected must be comprised of at least two of each of the following: upper case letter, lower case letter, number, and special character. The procedure for verifying these settings varies between AP models. Have the SA show the settings in the AP management console.

Check Text ( C-31751r2_chk )

This check only applies to access points that do not use a AAA (RADIUS) server for authentication services. In most cases, this means the access point is configured for WPA2 (Personal), which relies on password authentication, and not WPA2 (Enterprise) which uses a AAA server to authenticate each user based on that user’s authentication credentials.
Verify the client authentication password has been set on the access point with the following settings:

-14 characters or longer.
-The authentication password selected must be comprised of at least two of each of the following: upper case letter, lower case letter, number, and special character.

The procedure for verifying these settings varies between AP models. Have the SA show the settings in the AP management console.

Fix Text (F-28236r2_fix)
The key generation password configured on the WLAN Access Point must be set to a 14-character or longer complex password on access points that do not use AAA servers for authentication.