Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-73523 | WN12-00-000180 | SV-88205r1_rule | Medium |
Description |
---|
SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks as well as not being FIPS compliant. Disabling SMBv1 support may prevent access to file or print sharing resources with systems or devices that only support SMBv1. File shares and print services hosted on Windows Server 2003 are an example, however Windows Server 2003 is no longer a supported operating system. Some older network attached devices may only support SMBv1. |
STIG | Date |
---|---|
Windows Server 2012/2012 R2 Member Server Security Technical Implementation Guide | 2017-02-27 |
Check Text ( C-73889r1_chk ) |
---|
This applies to Windows 2012. Windows 2012 R2 uses a different method to disable SMBv1, see WN12-00-000160. If the following registry values are not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanWorkstation\ Value Name: DependOnService Type: REG_MULTI_SZ Value: Bowser MRxSmb20 NSI Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\mrxsmb10\ Value Name: Start Type: REG_DWORD Value: 0x00000004 (4) |
Fix Text (F-80257r1_fix) |
---|
Configure the following registry values to disable the SMBv1 protocol on the SMB client. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanWorkstation\ Value Name: DependOnService Type: REG_MULTI_SZ Value: Bowser MRxSmb20 NSI Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\mrxsmb10\ Value Name: Start Type: REG_DWORD Value: 0x00000004 (4) The following commands can be run from an elevated command prompt to configure the registry values as noted above. "sc.exe config lanmanworkstation depend= bowser/mrxsmb20/nsi" "sc.exe config mrxsmb10 start= disabled" The system must be restarted for the changes to take effect. |