When 802.1x is implemented and the VVoIP or VTC endpoint PC ports are disabled, the network access switch port must be configured to support a disabled PC port by configuring PC port traffic to the unused VLAN.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-19651	VVoIP 5320	SV-21792r2_rule		Medium

Description
A VVoIP or VTC endpoint that provides a PC port typically breaks 802.1x LAN access control mechanisms. The cause is the network access switch port is enabled or authorized (and configured) when the VVoIP or VTC endpoint authenticates to the network and is authorized to operate. This may permit whatever is connected to the PC port to have access to the LAN even if it is not authorized or uses 802.1x. Therefore, the practice of daisy chaining devices on a single LAN drop protected by 802.1x must be prohibited unless certain mitigating circumstances exist, or are configured. In the event a PC port is provided, the mitigation is to disable the port. However, the 802.1x implementation must install the configuration on the network access switch port required to support a VVoIP or VTC endpoint with a disabled PC port. This means the required configuration for the network access switch ports is to configure the appropriate VLAN for the VVoIP or VTC traffic and configuring the unused VLAN for the disabled PC port.

Description

A VVoIP or VTC endpoint that provides a PC port typically breaks 802.1x LAN access control mechanisms. The cause is the network access switch port is enabled or authorized (and configured) when the VVoIP or VTC endpoint authenticates to the network and is authorized to operate. This may permit whatever is connected to the PC port to have access to the LAN even if it is not authorized or uses 802.1x. Therefore, the practice of daisy chaining devices on a single LAN drop protected by 802.1x must be prohibited unless certain mitigating circumstances exist, or are configured. In the event a PC port is provided, the mitigation is to disable the port. However, the 802.1x implementation must install the configuration on the network access switch port required to support a VVoIP or VTC endpoint with a disabled PC port. This means the required configuration for the network access switch ports is to configure the appropriate VLAN for the VVoIP or VTC traffic and configuring the unused VLAN for the disabled PC port.

STIG	Date
Voice/Video over Internet Protocol (VVoIP) STIG	2016-06-28

Details

Check Text ( C-24000r2_chk )
If the VVoIP or VTC endpoints do not contain a PC port, this is not applicable. Review site documentation to confirm that when 802.1x is implemented and the VVoIP or VTC endpoint PC ports are disabled, the network access switch port is configured to support a disabled PC port by configuring PC port traffic to the unused VLAN. If 802.1x is implemented, the VVoIP or VTC endpoint PC ports are disabled, and the network access switch port is not configured to support a disabled PC port by configuring PC port traffic to the unused VLAN, this is a finding. The VVoIP or VTC endpoint network access switch port normally is configured with a VVoIP VLAN for the VVoIP traffic. This is IAW and supports the NI STIG requirement NET1435.

Check Text ( C-24000r2_chk )

If the VVoIP or VTC endpoints do not contain a PC port, this is not applicable.

Review site documentation to confirm that when 802.1x is implemented and the VVoIP or VTC endpoint PC ports are disabled, the network access switch port is configured to support a disabled PC port by configuring PC port traffic to the unused VLAN. If 802.1x is implemented, the VVoIP or VTC endpoint PC ports are disabled, and the network access switch port is not configured to support a disabled PC port by configuring PC port traffic to the unused VLAN, this is a finding.

The VVoIP or VTC endpoint network access switch port normally is configured with a VVoIP VLAN for the VVoIP traffic. This is IAW and supports the NI STIG requirement NET1435.

Fix Text (F-20355r2_fix)
Implement and document that when 802.1x is implemented and the VVoIP or VTC endpoint PC ports are disabled, the network access switch port is configured to support a disabled PC port by sending PC port traffic to the unused VLAN. Do not statically assign the switch port to the VVoIP or VTC VLAN.