The system must enable kernel core dumps.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-63257	ESXI-06-000044	SV-77747r1_rule		Low

Description
In the event of a system failure, the system must preserve any information necessary to determine cause of failure and any information necessary to return to operations with least disruption to mission processes.

STIG	Date
VMware vSphere ESXi 6.0 Security Technical Implementation Guide	2017-07-11

Details

Check Text ( C-63991r1_chk )
From the vSphere Web Client select the ESXi Host and right click. If the "Add Diagnostic Partition" option is greyed out then core dumps are configured. or From a PowerCLI command prompt while connected to the ESXi host run the following commands: $esxcli = Get-EsxCli $esxcli.system.coredump.partition.get() $esxcli.system.coredump.network.get() The first command prepares for the other two. The second command shows whether there is an active core dump partition configured. The third command shows whether a network core dump collector is configured and enabled, via the "HostVNic", "NetworkServerIP", "NetworkServerPort", and "Enabled" variables. If there is no active core dump partition or the network core dump collector is not configured and enabled, this is a finding.

Check Text ( C-63991r1_chk )

From the vSphere Web Client select the ESXi Host and right click. If the "Add Diagnostic Partition" option is greyed out then core dumps are configured.

or

From a PowerCLI command prompt while connected to the ESXi host run the following commands:

$esxcli = Get-EsxCli
$esxcli.system.coredump.partition.get()
$esxcli.system.coredump.network.get()

The first command prepares for the other two. The second command shows whether there is an active core dump partition configured. The third command shows whether a network core dump collector is configured and enabled, via the "HostVNic", "NetworkServerIP", "NetworkServerPort", and "Enabled" variables.

If there is no active core dump partition or the network core dump collector is not configured and enabled, this is a finding.

Fix Text (F-69175r1_fix)
From the vSphere Web Client select the ESXi Host and right click. Select the "Add Diagnostic Partition" option configure a core dump diagnostic partition. or From a PowerCLI command prompt while connected to the ESXi host run at least one of the following sets of commands: To configure a core dump partition: $esxcli = Get-EsxCli #View available partitions to configure $esxcli.system.coredump.partition.list() $esxcli.system.coredump.partition.set($null,"PartitionName",$null,$null) To configure a core dump collector: $esxcli = Get-EsxCli $esxcli.system.coredump.network.set($null,"vmkernel port to use",$null,"CollectorIP","CollectorPort") $esxcli.system.coredump.network.set($true)

Fix Text (F-69175r1_fix)

From the vSphere Web Client select the ESXi Host and right click. Select the "Add Diagnostic Partition" option configure a core dump diagnostic partition.

or

From a PowerCLI command prompt while connected to the ESXi host run at least one of the following sets of commands:

To configure a core dump partition:

$esxcli = Get-EsxCli
#View available partitions to configure
$esxcli.system.coredump.partition.list()
$esxcli.system.coredump.partition.set($null,"PartitionName",$null,$null)

To configure a core dump collector:

$esxcli = Get-EsxCli
$esxcli.system.coredump.network.set($null,"vmkernel port to use",$null,"CollectorIP","CollectorPort")
$esxcli.system.coredump.network.set($true)