The SSH daemon must display the Standard Mandatory DoD Notice and Consent Banner before granting access to the system.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-63185	ESXI-06-000008	SV-77675r1_rule		Medium

Description
Failure to display the DoD logon banner prior to a log in attempt will negate legal proceedings resulting from unauthorized access to system resources.

STIG	Date
VMware vSphere ESXi 6.0 Security Technical Implementation Guide	2017-07-11

Details

Check Text ( C-63919r1_chk )
From the vSphere Client select the ESXi Host and go to Configuration >> Advanced Settings. Select the Config.Etc.issue value and verify it is set to the following: "You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details." or From a PowerCLI command prompt while connected to the ESXi host run the following command: Get-VMHost \| Get-AdvancedSetting -Name Config.Etc.issue If the Config.Etc.issue setting (/etc/issue file) does not contain the logon banner exactly as shown above, this is a finding.

Check Text ( C-63919r1_chk )

From the vSphere Client select the ESXi Host and go to Configuration >> Advanced Settings. Select the Config.Etc.issue value and verify it is set to the following:

"You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."

or

From a PowerCLI command prompt while connected to the ESXi host run the following command:

Get-VMHost | Get-AdvancedSetting -Name Config.Etc.issue

If the Config.Etc.issue setting (/etc/issue file) does not contain the logon banner exactly as shown above, this is a finding.

Fix Text (F-69103r1_fix)
From the vSphere Client select the ESXi Host and go to Configuration >> Advanced Settings. Select the Config.Etc.issue value and configure it to one of the following. "You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details." or From a PowerCLI command prompt while connected to the ESXi host run the following commands: Get-VMHost \| Get-AdvancedSetting -Name Config.Etc.issue \| Set-AdvancedSetting -Value ""

Fix Text (F-69103r1_fix)

From the vSphere Client select the ESXi Host and go to Configuration >> Advanced Settings. Select the Config.Etc.issue value and configure it to one of the following.

"You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details."

or

From a PowerCLI command prompt while connected to the ESXi host run the following commands:

Get-VMHost | Get-AdvancedSetting -Name Config.Etc.issue | Set-AdvancedSetting -Value ""