The ESXi host must forward audit records containing information to establish what type of events occurred.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-258790	ESXI-80-000235	SV-258790r958412_rule		Medium

Description
Without establishing what types of events occurred, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack. Audit record content that may be necessary to satisfy this requirement includes, for example, time stamps, source and destination addresses, user/process/VM identifiers, event descriptions, success/fail indications, filenames involved, and access control or flow control rules invoked. Associating event types with detected events in the ESXi audit logs provides a means of investigating an attack; recognizing resource utilization or capacity thresholds; or identifying an improperly configured host.

Description

Without establishing what types of events occurred, it would be difficult to establish, correlate, and investigate the events leading up to an outage or attack. Audit record content that may be necessary to satisfy this requirement includes, for example, time stamps, source and destination addresses, user/process/VM identifiers, event descriptions, success/fail indications, filenames involved, and access control or flow control rules invoked. Associating event types with detected events in the ESXi audit logs provides a means of investigating an attack; recognizing resource utilization or capacity thresholds; or identifying an improperly configured host.

STIG	Date
VMware vSphere 8.0 ESXi Security Technical Implementation Guide	2024-07-11

Details

Check Text ( C-62530r933429_chk )
From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Advanced System Settings. Select the "Syslog.global.logLevel" value and verify it is set to "info". or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost \| Get-AdvancedSetting -Name Syslog.global.logLevel If the "Syslog.global.logLevel" setting is not set to "info", this is a finding. Note: Verbose logging level is acceptable for troubleshooting purposes.

Check Text ( C-62530r933429_chk )

From the vSphere Client, go to Hosts and Clusters.

Select the ESXi Host >> Configure >> System >> Advanced System Settings.

Select the "Syslog.global.logLevel" value and verify it is set to "info".

or

From a PowerCLI command prompt while connected to the ESXi host, run the following command:

Get-VMHost | Get-AdvancedSetting -Name Syslog.global.logLevel

If the "Syslog.global.logLevel" setting is not set to "info", this is a finding.

Note: Verbose logging level is acceptable for troubleshooting purposes.

Fix Text (F-62439r933430_fix)
From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Advanced System Settings. Click "Edit". Select the "Syslog.global.logLevel" value and configure it to "info". or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost \| Get-AdvancedSetting -Name Syslog.global.logLevel \| Set-AdvancedSetting -Value "info"

Fix Text (F-62439r933430_fix)

From the vSphere Client, go to Hosts and Clusters.

Select the ESXi Host >> Configure >> System >> Advanced System Settings.

Click "Edit". Select the "Syslog.global.logLevel" value and configure it to "info".

or

From a PowerCLI command prompt while connected to the ESXi host, run the following command:

Get-VMHost | Get-AdvancedSetting -Name Syslog.global.logLevel | Set-AdvancedSetting -Value "info"