Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The ESXi host must set a timeout to automatically end idle DCUI sessions after 10 minutes.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-258757 | ESXI-80-000196 | SV-258757r933332_rule | Medium |
| Description |
|---|
| When the Direct Console User Interface (DCUI) is enabled and logged in, it should be automatically logged out if left logged on to avoid access by unauthorized persons. The "DcuiTimeOut" setting defines a window of time after which the DCUI will be logged out. |
| STIG | Date |
|---|---|
| VMware vSphere 8.0 ESXi Security Technical Implementation Guide | 2023-10-11 |
Details
| Check Text ( C-62497r933330_chk ) |
|---|
| From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Advanced System Settings. Select the "UserVars.DcuiTimeOut" value and verify it is set to less than "600" and not "0". or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost | Get-AdvancedSetting -Name UserVars.DcuiTimeOut If the "UserVars.DcuiTimeOut" setting is set to a value greater than "600" or "0", this is a finding. |
| Fix Text (F-62406r933331_fix) |
|---|
| From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> System >> Advanced System Settings. Click "Edit". Select the "UserVars.DcuiTimeOut" value and configure it to "600". or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost | Get-AdvancedSetting -Name UserVars.DcuiTimeOut | Set-AdvancedSetting -Value 600 |