Host Guest File System (HGFS) file transfers must be disabled on the virtual machine (VM).

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-256456	VMCH-70-000007	SV-256456r886411_rule		Medium

Description
Setting "isolation.tools.hgfsServerSet.disable" to "true" disables registration of the guest's HGFS server with the host. Application Programming Interfaces (APIs) that use HGFS to transfer files to and from the guest operating system, such as some VIX commands, will not function. An attacker could use this to transfer files inside the guest operating system.

STIG	Date
VMware vSphere 7.0 Virtual Machine Security Technical Implementation Guide	2023-12-01

Details

Check Text ( C-60131r886409_chk )
From the vSphere Client, right-click the Virtual Machine and go to Edit Settings >> VM Options >> Advanced >> Configuration Parameters >> Edit Configuration. Verify the "isolation.tools.hgfsServerSet.disable" value is set to "true". or From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the following command: Get-VM "VM Name" \| Get-AdvancedSetting -Name isolation.tools.hgfsServerSet.disable If the virtual machine advanced setting "isolation.tools.hgfsServerSet.disable" does not exist or is not set to "true", this is a finding.

Check Text ( C-60131r886409_chk )

From the vSphere Client, right-click the Virtual Machine and go to Edit Settings >> VM Options >> Advanced >> Configuration Parameters >> Edit Configuration.

Verify the "isolation.tools.hgfsServerSet.disable" value is set to "true".

or

From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the following command:

Get-VM "VM Name" | Get-AdvancedSetting -Name isolation.tools.hgfsServerSet.disable

If the virtual machine advanced setting "isolation.tools.hgfsServerSet.disable" does not exist or is not set to "true", this is a finding.

Fix Text (F-60074r886410_fix)
From the vSphere Client, right-click the Virtual Machine and go to Edit Settings >> VM Options >> Advanced >> Configuration Parameters >> Edit Configuration. Find the "isolation.tools.hgfsServerSet.disable" value and set it to "true". If the setting does not exist, add the Name and Value setting at the bottom of screen. Note: The VM must be powered off to configure the advanced settings through the vSphere Client. Therefore, it is recommended to configure these settings with PowerCLI as this can be done while the VM is powered on. Settings do not take effect via either method until the virtual machine is cold started, not rebooted. or From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the provided commands as shown below. If the setting does not exist, run: Get-VM "VM Name" \| New-AdvancedSetting -Name isolation.tools.hgfsServerSet.disable -Value true If the setting exists, run: Get-VM "VM Name" \| Get-AdvancedSetting -Name isolation.tools.hgfsServerSet.disable \| Set-AdvancedSetting -Value true

Fix Text (F-60074r886410_fix)

From the vSphere Client, right-click the Virtual Machine and go to Edit Settings >> VM Options >> Advanced >> Configuration Parameters >> Edit Configuration.

Find the "isolation.tools.hgfsServerSet.disable" value and set it to "true".

If the setting does not exist, add the Name and Value setting at the bottom of screen.

Note: The VM must be powered off to configure the advanced settings through the vSphere Client. Therefore, it is recommended to configure these settings with PowerCLI as this can be done while the VM is powered on. Settings do not take effect via either method until the virtual machine is cold started, not rebooted.

or

From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the provided commands as shown below.

If the setting does not exist, run:

Get-VM "VM Name" | New-AdvancedSetting -Name isolation.tools.hgfsServerSet.disable -Value true

If the setting exists, run:

Get-VM "VM Name" | Get-AdvancedSetting -Name isolation.tools.hgfsServerSet.disable | Set-AdvancedSetting -Value true