Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The Photon operating system must not perform multicast packet forwarding.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-256574 | PHTN-30-000105 | SV-256574r887396_rule | Medium |
| Description |
|---|
| Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this software is used when not required, system network information may be unnecessarily transmitted across the network. |
| STIG | Date |
|---|---|
| VMware vSphere 7.0 vCenter Appliance Photon OS Security Technical Implementation Guide | 2023-02-21 |
Details
| Check Text ( C-60249r887394_chk ) |
|---|
| At the command line, run the following command: # /sbin/sysctl -a --pattern "net.ipv[4|6].conf.(all|default|eth.*).mc_forwarding" Expected result: net.ipv4.conf.all.mc_forwarding = 0 net.ipv4.conf.default.mc_forwarding = 0 net.ipv4.conf.eth0.mc_forwarding = 0 net.ipv6.conf.all.mc_forwarding = 0 net.ipv6.conf.default.mc_forwarding = 0 net.ipv6.conf.eth0.mc_forwarding = 0 If the output does not match the expected result, this is a finding. Note: The number of "ethx" lines returned is dependent on the number of interfaces. Every "ethx" entry must be set to "0". |
| Fix Text (F-60192r887395_fix) |
|---|
| At the command line, run the following command: # for SETTING in $(/sbin/sysctl -aN --pattern "net.ipv[4|6].conf.(all|default|eth.*).mc_forwarding"); do sed -i -e "/^${SETTING}/d" /etc/sysctl.conf;echo $SETTING=0>>/etc/sysctl.conf; done # /sbin/sysctl --load |