The Photon operating system must generate audit records when successful/unsuccessful attempts to access privileges occur.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-256497	PHTN-30-000020	SV-256497r887165_rule		Medium

Description
Audit records can be generated from various components within the information system (e.g., module or policy filter). Satisfies: SRG-OS-000064-GPOS-00033, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210, SRG-OS-000468-GPOS-00212

STIG	Date
VMware vSphere 7.0 vCenter Appliance Photon OS Security Technical Implementation Guide	2023-02-21

Details

Check Text ( C-60172r887163_chk )
At the command line, run the following command: # auditctl -l \| grep chmod Expected result: -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,fchownat,fchmodat -F auid>=1000 -F auid!=4294967295 -F key=perm_mod -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F key=perm_mod -a always,exit -F arch=b32 -S chmod,fchmod,fchown,chown,fchownat,fchmodat -F auid>=1000 -F auid!=4294967295 -F key=perm_mod -a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F key=perm_mod If the output does not match the expected result, this is a finding. Note: The auid!= parameter may display as 4294967295 or -1, which are equivalent. Note: This check depends on the auditd service to be in a running state for accurate results. The auditd service is enabled in control PHTN-30-000013.

Check Text ( C-60172r887163_chk )

At the command line, run the following command:

# auditctl -l | grep chmod

Expected result:

-a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,fchownat,fchmodat -F auid>=1000 -F auid!=4294967295 -F key=perm_mod

-a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F key=perm_mod

-a always,exit -F arch=b32 -S chmod,fchmod,fchown,chown,fchownat,fchmodat -F auid>=1000 -F auid!=4294967295 -F key=perm_mod

-a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F key=perm_mod

If the output does not match the expected result, this is a finding.

Note: The auid!= parameter may display as 4294967295 or -1, which are equivalent.

Note: This check depends on the auditd service to be in a running state for accurate results. The auditd service is enabled in control PHTN-30-000013.

Fix Text (F-60115r887164_fix)
Navigate to and open: /etc/audit/rules.d/audit.STIG.rules Add the following lines: -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,fchownat,fchmodat -F auid>=1000 -F auid!=4294967295 -F key=perm_mod -a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F key=perm_mod -a always,exit -F arch=b32 -S chmod,fchmod,fchown,chown,fchownat,fchmodat -F auid>=1000 -F auid!=4294967295 -F key=perm_mod -a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F key=perm_mod At the command line, run the following command to load the new audit rules: # /sbin/augenrules --load Note: A new "audit.STIG.rules" file is provided for placement in "/etc/audit/rules.d" that contains all rules needed for auditd. Note: An older "audit.STIG.rules" may exist if the file exists and references older "GEN" SRG IDs. This file can be removed and replaced as necessary with an updated one.

Fix Text (F-60115r887164_fix)

Navigate to and open:

/etc/audit/rules.d/audit.STIG.rules

Add the following lines:

-a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,fchownat,fchmodat -F auid>=1000 -F auid!=4294967295 -F key=perm_mod
-a always,exit -F arch=b64 -S chmod,fchmod,chown,fchown,lchown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F key=perm_mod
-a always,exit -F arch=b32 -S chmod,fchmod,fchown,chown,fchownat,fchmodat -F auid>=1000 -F auid!=4294967295 -F key=perm_mod
-a always,exit -F arch=b32 -S chmod,lchown,fchmod,fchown,chown,setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr,fchownat,fchmodat -F key=perm_mod

At the command line, run the following command to load the new audit rules:

# /sbin/augenrules --load

Note: A new "audit.STIG.rules" file is provided for placement in "/etc/audit/rules.d" that contains all rules needed for auditd.

Note: An older "audit.STIG.rules" may exist if the file exists and references older "GEN" SRG IDs. This file can be removed and replaced as necessary with an updated one.