The ESXi host must enable bidirectional Challenge-Handshake Authentication Protocol (CHAP) authentication for Internet Small Computer Systems Interface (iSCSI) traffic.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-256415	ESXI-70-000054	SV-256415r886026_rule		Medium

Description
When enabled, vSphere performs bidirectional authentication of both the iSCSI target and host. When not authenticating both the iSCSI target and host, there is potential for a man-in-the-middle attack, in which an attacker might impersonate either side of the connection to steal data. Bidirectional authentication mitigates this risk.

STIG	Date
VMware vSphere 7.0 ESXi Security Technical Implementation Guide	2023-02-21

Details

Check Text ( C-60090r886024_chk )
If iSCSI is not used, this is not applicable. From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> Storage >> Storage Adapters. Select the iSCSI adapter >> Properties >> Authentication >> Method. View the CHAP configuration and verify CHAP is required for target and host authentication. or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost \| Get-VMHostHba \| Where {$_.Type -eq "iscsi"} \| Select AuthenticationProperties -ExpandProperty AuthenticationProperties If iSCSI is used and CHAP is not set to "required" for both the target and host, this is a finding. If iSCSI is used and unique CHAP secrets are not used for each host, this is a finding.

Check Text ( C-60090r886024_chk )

If iSCSI is not used, this is not applicable.

From the vSphere Client, go to Hosts and Clusters.

Select the ESXi Host >> Configure >> Storage >> Storage Adapters.

Select the iSCSI adapter >> Properties >> Authentication >> Method.

View the CHAP configuration and verify CHAP is required for target and host authentication.

or

From a PowerCLI command prompt while connected to the ESXi host, run the following command:

Get-VMHost | Get-VMHostHba | Where {$_.Type -eq "iscsi"} | Select AuthenticationProperties -ExpandProperty AuthenticationProperties

If iSCSI is used and CHAP is not set to "required" for both the target and host, this is a finding.

If iSCSI is used and unique CHAP secrets are not used for each host, this is a finding.

Fix Text (F-60033r886025_fix)
From the vSphere Client, go to Hosts and Clusters. Select the ESXi Host >> Configure >> Storage >> Storage Adapters. Select the iSCSI adapter >> Properties >> Authentication. Click "Edit...". Set "Authentication Method" to "Use bidirectional CHAP" and enter a unique secret for each traffic flow direction. or From a PowerCLI command prompt while connected to the ESXi host, run the following command: Get-VMHost \| Get-VMHostHba \| Where {$_.Type -eq "iscsi"} \| Set-VMHostHba -ChapType Required -ChapName "chapname" -ChapPassword "password" -MutualChapEnabled $true -MutualChapName "mutualchapname" -MutualChapPassword "mutualpassword"

Fix Text (F-60033r886025_fix)

From the vSphere Client, go to Hosts and Clusters.

Select the ESXi Host >> Configure >> Storage >> Storage Adapters.

Select the iSCSI adapter >> Properties >> Authentication.

Click "Edit...". Set "Authentication Method" to "Use bidirectional CHAP" and enter a unique secret for each traffic flow direction.

or

From a PowerCLI command prompt while connected to the ESXi host, run the following command:

Get-VMHost | Get-VMHostHba | Where {$_.Type -eq "iscsi"} | Set-VMHostHba -ChapType Required -ChapName "chapname" -ChapPassword "password" -MutualChapEnabled $true -MutualChapName "mutualchapname" -MutualChapPassword "mutualpassword"