UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

The Photon operating system must be configured to synchronize with an approved DoD time source.


Overview

Finding ID Version Rule ID IA Controls Severity
V-239132 PHTN-67-000061 SV-239132r856050_rule Medium
Description
Inaccurate time stamps make it more difficult to correlate events and can lead to an inaccurate analysis. Determining the correct time a particular event occurred on a system is critical when conducting forensic analysis and investigating system events. Sources outside the configured acceptable allowance (drift) may be inaccurate. Synchronizing internal information system clocks provides uniformity of time stamps for information systems with multiple system clocks and systems connected over a network. Organizations should consider endpoints that may not have regular access to the authoritative time server (e.g., mobile, teleworking, and tactical endpoints). Satisfies: SRG-OS-000355-GPOS-00143, SRG-OS-000356-GPOS-00144
STIG Date
VMware vSphere 6.7 Photon OS Security Technical Implementation Guide 2022-09-27

Details

Check Text ( C-42343r675202_chk )
At the command line, execute the following command:

# grep -E '^\s*(server|peer|multicastclient)' /etc/ntp.conf

Confirm the servers and peers or multicastclient (as applicable) are local or an authoritative U.S. DoD source.

If no lines are returned or a non-local/non-authoritative time server is used, this is a finding.

OR

Navigate to https://:5480 to access the Virtual Appliance Management Interface (VAMI).

Authenticate and navigate to "Time".

If no appropriate time server is specified, this is a finding.
Fix Text (F-42302r675203_fix)
Open /etc/ntp.conf with a text editor and set its contents to the following:

tinker panic 0
restrict default kod nomodify notrap nopeer
restrict 127.0.0.1
restrict -6 ::1
driftfile /var/lib/ntp/drift/ntp.drift
server

At the command line, execute the following commands:

# chkconfig ntpd on
# systemctl start ntp

OR

Navigate to https://:5480 to access the VAMI.

Authenticate and navigate to "Time".

Click "Edit" in the top right and configure at least one appropriate NTP server.

Click "OK".