The NSX-T Tier-0 Gateway must be configured to have Internet Control Message Protocol (ICMP) unreachable notifications disabled on all external interfaces.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-251753	T0RT-3X-000064	SV-251753r856694_rule		Medium

Description
The ICMP supports IP traffic by relaying information about paths, routes, and network conditions. Routers automatically send ICMP messages under a wide variety of conditions. Host unreachable ICMP messages are commonly used by attackers for network mapping and diagnosis.

STIG	Date
VMware NSX-T Tier-0 Gateway RTR Security Technical Implementation Guide	2022-09-01

Details

Check Text ( C-55190r810141_chk )

If the Tier-0 Gateway is deployed in an Active/Active HA mode, this is Not Applicable. From the NSX-T Manager web interface, go to Security >> Gateway Firewall >> Gateway Specific Rules, and choose each Tier-0 Gateway in the drop-down. Review each Tier-0 Gateway Firewall rule to verify one exists to drop ICMP unreachable messages. If a rule does not exist to drop ICMP unreachable messages, this is a finding.

Fix Text (F-55144r810142_fix)

To configure a shared rule to drop ICMP unreachable messages do the following: From the NSX-T Manager web interface, go to Security >> Gateway Firewall >> All Shared Rules. Click "Add Rule" (Add a policy first if needed), under services select "ICMP Destination Unreachable", and then click "Apply". Enable logging, and under the Applied To field select the target Tier-0 Gateways. Click "Publish" to enforce the new rule. Note: A rule can also be created under Gateway Specific Rules to meet this requirement.