The system must control access to VMs through the dvfilter network APIs.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
ESXI5-VM-000051	ESXI5-VM-000051	ESXI5-VM-000051_rule		Low

Description
A VM must be configured explicitly to accept access by the dvfilter network API. This should be done only for VMs that are wanted to be done. An attacker might compromise the VM by making use of this introspection channel.

STIG	Date
VMware ESXi v5 Security Technical Implementation Guide	2013-01-15

Details

Check Text ( C-ESXI5-VM-000051_chk )
Temporarily disable Lockdown Mode and enable the ESXi Shell via the vSphere Client. Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials. If connecting to vCenter Server, click on the desired host. Click the Configuration tab. Click Software, Security Profile, Services, Properties, ESXi Shell, and Options, respectively. Start the ESXi Shell service, where/as required. As root, log in to the ESXi Shell and locate the VM's vmx file. # find / \| grep vmx Check the VM's ".vmx" file for the correct " = " pair. keyword = ethernetn.filtern.name keyval = # grep "^" Ask the SA if dvfilter is being used. If dvfilter is being used and the above command return is either empty or does not reflect the above keyword and keyval value(s), this is a finding. Re-enable Lockdown Mode on the host.

Check Text ( C-ESXI5-VM-000051_chk )

Temporarily disable Lockdown Mode and enable the ESXi Shell via the vSphere Client.

Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials.
If connecting to vCenter Server, click on the desired host.
Click the Configuration tab.
Click Software, Security Profile, Services, Properties, ESXi Shell, and Options, respectively.
Start the ESXi Shell service, where/as required.

As root, log in to the ESXi Shell and locate the VM's vmx file.
# find / | grep vmx

Check the VM's ".vmx" file for the correct " = " pair.
keyword = ethernetn.filtern.name
keyval =
# grep "^"

Ask the SA if dvfilter is being used. If dvfilter is being used and the above command return is either empty or does not reflect the above keyword and keyval value(s), this is a finding.

Re-enable Lockdown Mode on the host.

Fix Text (F-ESXI5-VM-000051_fix)
Ask the SA if dvfilter is being used. If it is, configure the VM with the correct " = " pair. To edit a powered-down virtual machine's .vmx file, first remove it from vCenter Server's inventory. Manual additions to the .vmx file from ESXi will be overwritten by any registered entries stored in the vCenter Server database. Make a backup copy of the .vmx file. If the edit breaks the virtual machine, it can be rolled back to the original version of the file. Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials. If connecting to vCenter Server, click on the desired host. Click the Configuration tab. Click Storage. Right-click on the appropriate datastore and click Browse Datastore. Navigate to the folder named after the virtual machine, and locate the .vmx file. Right-click the .vmx file and click Remove from inventory. Temporarily disable Lockdown Mode and enable the ESXi Shell via the vSphere Client. Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials. If connecting to vCenter Server, click on the desired host. Click the Configuration tab. Click Software, Security Profile, Services, Properties, ESXi Shell, and Options, respectively. Start the ESXi Shell service, where/as required. As root, log in to the ESXi host and locate the VM's vmx file. # find / \| grep vmx Add the following to the VM's vmx file. keyword = "keyval" Where: keyword = ethernetn.filtern.name keyval = Re-enable Lockdown Mode on the host. Re-register the VM with the vCenter Server: Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials. If connecting to vCenter Server, click on the desired host. Click the Configuration tab. Click Storage. Right-click on the appropriate datastore and click Browse Datastore. Navigate to the folder named after the virtual machine, and locate the .vmx file. Right-click the .vmx file and click Add to inventory. The Add to Inventory wizard opens. Continue to follow the wizard to add the virtual machine.

Fix Text (F-ESXI5-VM-000051_fix)

Ask the SA if dvfilter is being used. If it is, configure the VM with the correct " = " pair.

To edit a powered-down virtual machine's .vmx file, first remove it from vCenter Server's inventory. Manual additions to the .vmx file from ESXi will be overwritten by any registered entries stored in the vCenter Server database. Make a backup copy of the .vmx file. If the edit breaks the virtual machine, it can be rolled back to the original version of the file.

Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials.
If connecting to vCenter Server, click on the desired host.
Click the Configuration tab.
Click Storage.
Right-click on the appropriate datastore and click Browse Datastore.
Navigate to the folder named after the virtual machine, and locate the .vmx file.
Right-click the .vmx file and click Remove from inventory.

Temporarily disable Lockdown Mode and enable the ESXi Shell via the vSphere Client.

Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials.
If connecting to vCenter Server, click on the desired host.
Click the Configuration tab.
Click Software, Security Profile, Services, Properties, ESXi Shell, and Options, respectively.
Start the ESXi Shell service, where/as required.

As root, log in to the ESXi host and locate the VM's vmx file.
# find / | grep vmx

Add the following to the VM's vmx file.
keyword = "keyval"

Where:
keyword = ethernetn.filtern.name
keyval =

Re-enable Lockdown Mode on the host.

Re-register the VM with the vCenter Server:
Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials.
If connecting to vCenter Server, click on the desired host.
Click the Configuration tab.
Click Storage.
Right-click on the appropriate datastore and click Browse Datastore.
Navigate to the folder named after the virtual machine, and locate the .vmx file.
Right-click the .vmx file and click Add to inventory. The Add to Inventory wizard opens.
Continue to follow the wizard to add the virtual machine.