UCF STIG Viewer Logo

The system must limit sharing of console connections.


Overview

Finding ID Version Rule ID IA Controls Severity
ESXI5-VM-000039 ESXI5-VM-000039 ESXI5-VM-000039_rule Medium
Description
By default, remote console sessions can be connected to by more than one user at a time. When multiple sessions are activated, each terminal window gets a notification about the new session. If an administrator in the VM logs in using a VMware remote console during their session, a non-administrator in the VM might connect to the console and observe the administrator's actions. Also, this could result in an administrator losing console access to a virtual machine. For example, if a jump box is being used for an open console session and the admin loses connection to that box, then the console session remains open. Allowing two console sessions permits debugging via a shared session. For highest security, only one remote console session at a time should be allowed.
STIG Date
VMware ESXi v5 Security Technical Implementation Guide 2013-01-15

Details

Check Text ( C-ESXI5-VM-000039_chk )
Temporarily disable Lockdown Mode and enable the ESXi Shell via the vSphere Client.

Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials.
If connecting to vCenter Server, click on the desired host.
Click the Configuration tab.
Click Software, Security Profile, Services, Properties, ESXi Shell, and Options, respectively.
Start the ESXi Shell service, where/as required.

As root, log in to the ESXi Shell and locate the VM's vmx file.
# find / | grep vmx

Check the VM's ".vmx" file for the correct " = " pair.
keyword = RemoteDisplay.maxConnections
keyval = 1
# grep "^"

If the above command return is either empty or does not reflect the above keyword and keyval value(s), this is a finding.

Re-enable Lockdown Mode on the host.
Fix Text (F-ESXI5-VM-000039_fix)
Configure the VM with the correct " = " pair.

To edit a powered-down virtual machine's .vmx file, first remove it from vCenter Server's inventory. Manual additions to the .vmx file from ESXi will be overwritten by any registered entries stored in the vCenter Server database. Make a backup copy of the .vmx file. If the edit breaks the virtual machine, it can be rolled back to the original version of the file.

Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials.
If connecting to vCenter Server, click on the desired host.
Click the Configuration tab.
Click Storage.
Right-click on the appropriate datastore and click Browse Datastore.
Navigate to the folder named after the virtual machine, and locate the .vmx file.
Right-click the .vmx file and click Remove from inventory.

Temporarily disable Lockdown Mode and enable the ESXi Shell via the vSphere Client.

Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials.
If connecting to vCenter Server, click on the desired host.
Click the Configuration tab.
Click Software, Security Profile, Services, Properties, ESXi Shell, and Options, respectively.
Start the ESXi Shell service, where/as required.

As root, log in to the ESXi host and locate the VM's vmx file.
# find / | grep vmx

Add the following to the VM's vmx file.
keyword = "keyval"

Where:
keyword = RemoteDisplay.maxConnections
keyval = 1

Re-enable Lockdown Mode on the host.

Re-register the VM with the vCenter Server:
Open the vSphere/VMware Infrastructure (VI) Client and log in with appropriate credentials.
If connecting to vCenter Server, click on the desired host.
Click the Configuration tab.
Click Storage.
Right-click on the appropriate datastore and click Browse Datastore.
Navigate to the folder named after the virtual machine, and locate the .vmx file.
Right-click the .vmx file and click Add to inventory. The Add to Inventory wizard opens.
Continue to follow the wizard to add the virtual machine.