The VTU must use FIPS 140-2 validated encryption module.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-17684	RTS-VTC 1230.00	SV-18858r2_rule	ECCT-1 ECNK-1 ECSC-1	Medium

Description
The current DoD requirement for commercial grade encryption is that the encryption module, which includes a FIPS 197 validated encryption algorithm plus approved functions (i.e., key management and sharing/distribution functions), be NIST validated to FIPS 140-2. It must be noted that legacy equipment validated to FIPS 140-1 may still be used and FIPS 140-3 is in development. While many VTU vendors support AES, they have only validated the algorithm to FIPS-197, if at all. This does not meet the FIPS 140-2 requirement because the additional approved functions have not been addressed.

Description

The current DoD requirement for commercial grade encryption is that the encryption module, which includes a FIPS 197 validated encryption algorithm plus approved functions (i.e., key management and sharing/distribution functions), be NIST validated to FIPS 140-2. It must be noted that legacy equipment validated to FIPS 140-1 may still be used and FIPS 140-3 is in development. While many VTU vendors support AES, they have only validated the algorithm to FIPS-197, if at all. This does not meet the FIPS 140-2 requirement because the additional approved functions have not been addressed.

STIG	Date
Video Services Policy STIG	2017-04-06

Details

Check Text ( C-18954r2_chk )
Interview the ISSO to validate compliance with the following requirement: Ensure VTUs under his/her control employ encryption module(s) validated to FIPS 140-2. Determine if the various VTUs with which the system under review is expected to communicate support and are using FIPS 140-2 validated encryption modules and that they are operated in FIPS mode. Have the ISSO or SA demonstrate and verify that the VTU is using 140-2 encryption in FIPS mode. Review documentation from the vendor designating the encryption modules in use and verify that they are listed on the NIST CMVP validated modules web site (http://csrc.nist.gov/groups/STM/cmvp/validation.html). If the VTU does not use FIPS 140-2 validated encryption module, this is a finding.

Check Text ( C-18954r2_chk )

Interview the ISSO to validate compliance with the following requirement:

Ensure VTUs under his/her control employ encryption module(s) validated to FIPS 140-2.

Determine if the various VTUs with which the system under review is expected to communicate support and are using FIPS 140-2 validated encryption modules and that they are operated in FIPS mode. Have the ISSO or SA demonstrate and verify that the VTU is using 140-2 encryption in FIPS mode. Review documentation from the vendor designating the encryption modules in use and verify that they are listed on the NIST CMVP validated modules web site (http://csrc.nist.gov/groups/STM/cmvp/validation.html). If the VTU does not use FIPS 140-2 validated encryption module, this is a finding.

Fix Text (F-17581r2_fix)
Purchase and install only those VTUs and MCUs that employ encryption modules that are validated to FIPS 140-2 standards. Upgrade or replace non-compliant devices. Note: Updating firmware or software to provide desired functionality is preferred. A vendor may provide security updates and patches that offer additional functions. In many cases, the IA Vulnerability Management (IAVM) system mandates updating software to reduce risk to DoD networks.

Fix Text (F-17581r2_fix)

Purchase and install only those VTUs and MCUs that employ encryption modules that are validated to FIPS 140-2 standards. Upgrade or replace non-compliant devices.

Note: Updating firmware or software to provide desired functionality is preferred. A vendor may provide security updates and patches that offer additional functions. In many cases, the IA Vulnerability Management (IAVM) system mandates updating software to reduce risk to DoD networks.