UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

TOSS must not allow interfaces to perform Internet Control Message Protocol (ICMP) redirects by default.


Overview

Finding ID Version Rule ID IA Controls Severity
V-253123 TOSS-04-040820 SV-253123r825041_rule Medium
Description
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table, possibly revealing portions of the network topology. There are notable differences between Internet Protocol version 4 (IPv4) and Internet Protocol version 6 (IPv6). There is only a directive to disable sending of IPv4 redirected packets. Refer to RFC4294 for an explanation of "IPv6 Node Requirements", which resulted in this difference between IPv4 and IPv6.
STIG Date
Tri-Lab Operating System Stack (TOSS) 4 Security Technical Implementation Guide 2022-08-29

Details

Check Text ( C-56576r825039_chk )
Verify TOSS does not allow interfaces to perform Internet Protocol version 4 (IPv4) ICMP redirects by default.

Note: If IPv4 is disabled on the system, this requirement is Not Applicable.

Check the value of the "default send_redirects" variables with the following command:

$ sudo sysctl net.ipv4.conf.default.send_redirects

net.ipv4.conf.default.send_redirects=0

If the returned line does not have a value of "0", or a line is not returned, this is a finding.
Fix Text (F-56526r825040_fix)
Configure TOSS to not allow interfaces to perform Internet Protocol version 4 (IPv4) ICMP redirects by default with the following command:

$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0

If "0" is not the system's default value then add or update the following line in the appropriate file under "/etc/sysctl.d":

net.ipv4.conf.default.send_redirects=0