UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

TOSS must ignore IPv4 Internet Control Message Protocol (ICMP) redirect messages.


Overview

Finding ID Version Rule ID IA Controls Severity
V-253118 TOSS-04-040770 SV-253118r825026_rule Medium
Description
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
STIG Date
Tri-Lab Operating System Stack (TOSS) 4 Security Technical Implementation Guide 2022-08-29

Details

Check Text ( C-56571r825024_chk )
Verify TOSS ignores IPv4 ICMP redirect messages.

Note: If IPv4 is disabled on the system, this requirement is Not Applicable.

Check the value of the "accept_redirects" variables with the following command:

$ sudo sysctl net.ipv4.conf.all.accept_redirects

net.ipv4.conf.all.accept_redirects = 0

If the returned line does not have a value of "0", a line is not returned, or the line is commented out, this is a finding.
Fix Text (F-56521r825025_fix)
Configure TOSS to ignore IPv4 ICMP redirect messages with the following command:

$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0

If "0" is not the system's default value then add or update the following line in the appropriate file under "/etc/sysctl.d":

net.ipv4.conf.all.accept_redirects = 0