Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-30987 | EC-03.03.01 | SV-41031r3_rule | Low |
Description |
---|
Failure to use automatic voltage control can result in damage to the IT equipment creating a service outage. REFERENCES: DoD 5200.22-M (NISPOM), Incorporating Change 2, 18 May 2016 Chapter 5, Section 1, paragraph 5-104 NIST Special Publication 800-53 (SP 800-53), Rev 4, Controls: PE-9(2) NIST SP 800-12, An Introduction to Computer Security: The NIST Handbook NIST SP 800-100 Information Security Handbook: A Guide for Managers |
STIG | Date |
---|---|
Traditional Security Checklist | 2020-08-26 |
Check Text ( C-39651r5_chk ) |
---|
Check there is an IT area voltage control unit and that it is being utilized for all key IT assets. NOTES: This requirement should not be applied to a tactical environment, unless it is a fixed computer facility supporting missions in a Theater of Operations. The standards to be applied for applicability in a tactical environment are: 1) The facility containing the computer room has been in operation over one year. 2) The facility is "fixed facility" - a hard building made from normal construction materials - wood, steel, brick, stone, mortar, etc. |
Fix Text (F-34797r4_fix) |
---|
An Information Technology (IT) area voltage control unit must be installed and used for all key IT assets. |