acceptedTest and Development Zone C Security Technical Implementation GuideThe Test & Development Zone A STIG is published as a tool to improve the security of Department of Defense (DoD) information systems. Comments or proposed revisions to this document should be sent via e-mail to the following address: disa.stig_spt@mail.mil.DISASTIG.DOD.MILRelease: 5 Benchmark Date: 26 Oct 20181I - Mission Critical Classified<ProfileDescription></ProfileDescription>I - Mission Critical Public<ProfileDescription></ProfileDescription>I - Mission Critical Sensitive<ProfileDescription></ProfileDescription>II - Mission Support Classified<ProfileDescription></ProfileDescription>II - Mission Support Public<ProfileDescription></ProfileDescription>II - Mission Support Sensitive<ProfileDescription></ProfileDescription>III - Administrative Classified<ProfileDescription></ProfileDescription>III - Administrative Public<ProfileDescription></ProfileDescription>III - Administrative Sensitive<ProfileDescription></ProfileDescription>ENTD0010 - The test and development infrastructure is not properly documented.<GroupDescription></GroupDescription>ENTD0010Network infrastructure and systems supporting the test and development environment must be documented within the organizations accreditation package.<VulnDiscussion>Up-to-date documentation is essential in assisting with the management, auditing, and security of the network infrastructure used to support the test and development environment. Network diagrams are important because they show the overall layout where devices are physically located within the network infrastructure. Diagrams also show the relationship and connectivity between devices where possible intrusive attacks could take place. Having up-to-date network diagrams will also help show what the security, traffic, and physical impact of adding a system will be on the network.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility>Information Assurance Officer</Responsibility><Responsibility>Information Assurance Manager</Responsibility><IAControls>DCHW-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Document network infrastructure and systems supporting the test and development environment, then include it with the accreditation package.Review the accreditation package documentation to verify the test and development environment is correctly documented within the network diagrams and site security plan. If the organization's accreditation package does not include the test and development infrastructure in the network diagrams and system security plan, this is a finding.ENTD0020 - The test and development infrastructure does not follow a CAP.<GroupDescription></GroupDescription>ENTD0020Network infrastructure and systems supporting the test and development environment must follow DoD certification and accreditation procedures before connecting to a DoD operational network or Internet Service Provider.<VulnDiscussion>Prior to connecting to a live operational network, such as the DISN, systems, at minimum, receive an IATO. A system without an IATO does not show adequate effort to meet IA controls and security requirements and may pose a risk to other computers or systems connecting to the operational network.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility>Information Assurance Officer</Responsibility><Responsibility>Information Assurance Manager</Responsibility><IAControls>EBCR-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Certify and accredit the test and development infrastructure and supporting systems connecting to the DISN. Keep the IATO with the organization's accreditation package.Review the accreditation package documentation to verify the test and development environment has been granted an IATO to connect to the DISN. If an IATO has not been granted, this is a finding.
If the zone environment does not have any connectivity to the DISN or commercial ISP, this requirement is not applicable.ENTD0030 - The test and development infrastructure registered in DoD asset management program.<GroupDescription></GroupDescription>ENTD0030Network infrastructure and systems supporting the test and development environment must be registered in a DoD asset management system.<VulnDiscussion>An asset management system is used to send out notifications on vulnerabilities in commercial and military information infrastructures as they are discovered. If the organization's assets are not registered with an asset management system, administrators will not be notified of important vulnerabilities such as viruses, denial of service attacks, system weaknesses, back doors, and other potentially harmful situations. Additionally, there will be no way to enter, track, or resolve findings during a review.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>VIVM-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Register the network infrastructure and systems supporting the test and development environment in a DoD asset management program.Determine whether all systems and network infrastructure devices supporting the test and development environment are registered in an asset management system. If any systems and network infrastructure devices supporting the test and development environment are not registered in an asset management system, this is a finding.ENTD0040 - The test and development infrastructure is not managed through management network.<GroupDescription></GroupDescription>ENTD0040Network infrastructure and systems supporting the test and development environment must be managed from a management network.<VulnDiscussion>It is important to restrict administrative access to the supporting network infrastructure and systems in the test and development environment, as it reduces the risk of data theft or interception from an attacker on the operational network.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECSC-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Engineer a management network solution and document it within the test and development network diagrams.Review the network diagrams to determine whether a management network has been established to manage the network infrastructure and systems supporting the test and development environment. If a management network has not been established to manage the test and development environment infrastructure, this is a finding.ENTD0050 - Impersistent connections do not have approval.<GroupDescription></GroupDescription>ENTD0050The organization must document impersistent connections to the test and development environment with approval by the organizations Authorizing Official.<VulnDiscussion>An impersistent connection is any temporary connection needed to another test and development environment or DoD operational network where testing is not feasible. As any unvetted connection or device will create additional risk and compromise the entire environment, it is up to the Authorizing Official for the organization to accept the risk of an impersistent connection.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>EBCR-1, ECSD-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Create and have on file up-to-date documentation of the authorized risk approval for impersistent connections or devices.Review documentation for impersistent connections or devices to ensure the risk has been thoroughly assessed and approved by the Authorizing Official. If no documented approval is available for impersistent connections, this is a finding.ENTD0070 - Antivirus not installed on development systems.<GroupDescription></GroupDescription>ENTD0070Development systems must have antivirus installed and enabled with up-to-date signatures.<VulnDiscussion>Virus scan programs are a primary line of defense against the introduction of viruses and malicious code that can destroy data and even render a computer inoperable. Utilizing the most current virus scan program provides the ability to detect this malicious code before extensive damage occurs. Updated virus scan data files help protect a system, as new malware is identified by the software vendors on a regular basis.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECSC-1, ECVP-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Install antivirus with current signatures on development systems.Review development images to determine whether antivirus is installed and configured with current signatures. If antivirus is missing on development systems, this is a finding.
If there isn't any application development occurring in the zone environment, this requirement is not applicable.ENTD0080 - HIDS or HIPS not installed on development system.<GroupDescription></GroupDescription>ENTD0080Development systems must have HIDS or HIPS installed and configured with up-to-date signatures.<VulnDiscussion>A HIDS or HIPS application is a secondary line of defense behind the antivirus. The application will monitor all ports and the dynamic state of a development system. If the application detects irregularities on the system, it will block incoming traffic that may potentially compromise the development system that can lead to a DoS or data theft.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECID-1, ECSC-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Install and configure a HIDS or HIPS application on development system images.Review the development images to determine whether a HIDS or HIPS application is installed and configured. If a HIDS or HIPS application is not installed and configured on the development image, this is a finding.
If there isn't any application development occurring in the zone environment, this requirement is not applicable.ENTD0090 - A firewall is not present on the development system.<GroupDescription></GroupDescription>ENTD0090Development systems must have a firewall installed, configured, and enabled.<VulnDiscussion>A firewall provides a line of defense against malicious attacks. To be effective, it must be enabled and properly configured.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECSC-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Install, configure, and enable either the OS or a third party firewall on the development system.Review the development images to determine whether the OS or a third party firewall has been installed, configured, and enabled. If a firewall is not installed, configured, and enabled, this is a finding.
If there isn't any application development occurring in the zone environment, this requirement is not applicable.ENTD0100 - A patch management solution is not implemented for development systems.<GroupDescription></GroupDescription>ENTD0100Development systems must be part of a patch management solution.<VulnDiscussion>Major software vendors release security patches and hotfixes to their products when security vulnerabilities are discovered. It is essential that these updates be applied in a timely manner to prevent unauthorized individuals from exploiting identified vulnerabilities.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECSC-1, VIVM-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Implement a patch management solution to keep development systems up to date with the latest security patches released by the vendor.Determine whether the organization has a patch management solution in place to apply security patches released by the vendor. If a patch management solution has not been implemented and is not functioning to update development systems with the latest patches, this is a finding.
If there isn't any application development occurring in the zone environment, this requirement is not applicable.ENTD0110 - A change management policy is not implemented.<GroupDescription></GroupDescription>ENTD0110A change management policy must be implemented for application development.<VulnDiscussion>Change management is the formal review process that ensures that all changes made to a system or application receives formal review and approval. Change management reduces impacts from proposed changes that could possibly have interruptions to the services provided. Recording all changes for applications will be accomplished by a configuration management policy. The configuration management policy will capture the actual changes to software code and anything else affected by the change.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>DCII-1, DCPR-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Create a change management policy for the organization for application and system development.Interview the ISSM/ISSO to determine whether a current Change Control Management policy has been implemented in the organization. If a change management policy has not been created and implemented for the organization, this is a finding.
If there isn't any application development occurring in the zone environment, this requirement is not applicable.ENTD0120 - Applications moving to operational networks not approved.<GroupDescription></GroupDescription>ENTD0120The organization must document and gain approval from the Change Control Authority prior to migrating data to DoD operational networks.<VulnDiscussion>Without the approval of the Change Control Authority, data moved from the test and development network into an operational network could pose a risk of containing malicious code or cause other unintended consequences to live operational data. Data moving into operational networks from final stage preparation must always be vetted and approved.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECSC-1, ECSD-1, ECSD-2</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Create a policy to document all finalized projects to gain approval by the Change Control Authority prior to deploying finalized projects to a DoD operational network.Review the change control documentation for the environment to determine whether the organization has prior approval to move data from the test and development environment to the operational network after final testing. If the organization does not keep a change control log or the log exists but is not current, this is a finding.
If there isn't any application development occurring in the zone environment, this requirement is not applicable.ENTD0130 - Code review not completed prior to application deployment.<GroupDescription></GroupDescription>ENTD0130Application code must go through a code review prior to deployment into DoD operational networks.<VulnDiscussion>Prior to release of the application receiving an IATO for deployment into a DoD operational network, the application will have a thorough code review. Along with the proper testing, the code review will specify flaws causing security, compatibility, or reliability concerns that may compromise the operational network.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>DCSQ-1, ECSC-1, ECSD-1, ECSD-2</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Implement a code review policy for applications before deployment into DoD operational networks.Determine whether there is a policy in place for code review prior to applications being deployed into a DoD operational network. If a code review policy has not been established, this is a finding.
If there isn't any application development occurring in the zone environment, this requirement is not applicable.ENTD0140 - Source code not restricted to authorized individuals.<GroupDescription></GroupDescription>ENTD0140Access to source code during application development must be restricted to authorized users.<VulnDiscussion>Restricting access to source code and the application to authorized users will limit the risk of source code theft or other potential compromise.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECAN-1, ECCD-1, ECLP-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Document all authorized users with access to the development environment and access to source code. If the documentation exists but is not current, bring the documentation up to date.Review the organization's site security plan and documentation to determine whether there is a list of current authorized users. If a current list of authorized users is missing from the site security plan for the test and development environment, this is a finding.
If there isn't any application development occurring in the zone environment, this requirement is not applicable.ENTD0150 - Operational data is not sanitized prior to testing.<GroupDescription></GroupDescription>ENTD0150The organization must sanitize data transferred to test and development environments from DoD operational networks for testing to remove personal and sensitive information exempt from the Freedom of Information Act.<VulnDiscussion>If DoD production data is transferred to a test and development environment and personal or sensitive information has not been sanitized from the data, personal or sensitive information could be exposed or compromised.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Create organizational policies and procedures to prohibit the use of any live operational DoD data or Privacy Act information in the test and development environment.Determine the data type on systems within the test and development environment. Interview the ISSM or ISSO regarding the connection approval process for housing DoD live operational data or Privacy Act information on any test or development system. If the test and development environment is using live DoD data or Privacy Act information, this is a finding.ENTD0210 - Test and development environment has access to DoD operational networks.<GroupDescription></GroupDescription>ENTD0210The test and development environment must not have access to DoD operational networks.<VulnDiscussion>Systems or devices used for test data that do not meet minimum IA standards for accreditation are a risk to a DoD operational network if allowed to communicate between environments. Data that has not been fully tested and finalized for use in an operational network may cause unintended consequences, such as data loss or corruption. Unvetted data allowed into a DoD operational network from non-IA-compliant machines may also contain malicious code that could be used to steal or damage live data.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECSC-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Prohibit non-IA-compliant systems or devices in the test and development environment from accessing any DoD operational network or live data.Determine whether there are procedures in place to prohibit non-IA-compliant systems or devices from accessing any DoD operational network. If no procedure is in place to prohibit connection to any DoD operational network by non-IA-compliant systems, this is a finding.ENTD0260 - Tunneling mechanism not used for transport.<GroupDescription></GroupDescription>ENTD0260Tunneling mechanisms must be used for data transmission between interconnected organizations.<VulnDiscussion>Using tunnels will prohibit data shared between interconnecting sites from leaking onto untrusted networks. These mechanisms are vital for transit over an untrusted network so sensitive information is not accidentally leaked onto the DISN or a non-DoD network. Typical tunnel mechanisms found in use today include, but are not limited to, IPSec, MPLS, GRE, and TACLANE. </VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECIC-1, ECSC-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Engineer a solution to establish tunnel mechanisms interconnected between organizations over untrusted networks.Review the network diagrams to determine whether a tunnel is being used for transport across any untrusted network, such as the DISN or ISP. If a tunnel mechanism is not being used to carry information to other organizations over an untrusted network, this is a finding.ENTD0270 - Sensitive data sent between organizations not encrypted.<GroupDescription></GroupDescription>ENTD0270Sensitive data transmitted between interconnected organizations must be encrypted using an approved mechanism for the classification level of the data transmitted.<VulnDiscussion>The use of encryption at the appropriate level to secure the confidentiality and integrity of sensitive information is imperative to ensure a data breach does not occur when transiting a transport network. If the information shared between interconnecting sites is marked for anything other than public release or is need to know, then it must use encryption correlating with the classification of the data in transit. Unclassified/FOUO will need to use a FIPS 140-2 validated cryptographic module. Classified traffic needs to use an NSA approved encryption standard.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECCT-1, ECCT-2, ECIC-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Implement an approved encryption mechanism for the classification of data being shared between interconnected organizations. Unclassified/FOUO or any need-to-know data will need to use a FIPS 140-2 validated cryptographic module. Classified traffic must use an NSA approved encryption standard.Determine whether the proper encryption standard is deployed for the classification of information being shared between interconnected organizations. Unclassified/FOUO or any need-to-know data will need to use a FIPS 140-2 validated cryptographic module. Classified traffic must use an NSA approved encryption standard. If the proper encryption standard is not in use for sharing information between interconnected sites, this is a finding.ENTD0290 - Remote access to the environment is not prohibited.<GroupDescription></GroupDescription>ENTD0290The organization must prohibit remote access from external networks to the test and development environment.<VulnDiscussion>Because the test and development environment is a closed network, any network or remote access from outside the designated environment boundaries is prohibited. Allowing remote access from an untrusted external network will leave the network open to attacks and compromised.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECSC-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Prohibit remote access to the test and development environment from external networks.Verify the organization's policies and procedures to prohibit remote access to the test and development environment from external networks. If policies and procedures are not available to prohibit remote access to the test and development environment from external networks, this is a finding.ENTD0330 - Operational along with test and developments VMs share same host.<GroupDescription></GroupDescription>ENTD0330Virtual machines used for application development and testing must not share the same physical host with DoD operational virtual machines.<VulnDiscussion>Attacks on virtual machines from other VMs through denial of service and other attacks potentially stealing sensitive data such as source code used in application development. It is imperative to keep DoD operational virtual machines on physically separate platforms from test and development virtual machines.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>ECSC-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Engineer a solution to use separate physical hosts for DoD operational and T&D virtual machines.Review the system plan to determine whether physical hosts are sharing DoD operational and test and development virtual machines.ENTD0340 - Approved contracts are not in place between interconnected organizations.<GroupDescription></GroupDescription>ENTD0340Organizations interconnecting test and development environments must have MOAs, MOUs, and SLAs properly documented.<VulnDiscussion>Prior to establishing a connection with another organization, a Memorandum of Understanding (MOU), Memorandum of Agreement (MOA), and/or Service Level Agreement (SLA) must be established between the two organizations. This documentation, along with diagrams of the network topology, is required to be submitted to the DAAs for approval to connect to each other. The policy must ensure that all connections to external networks conform equally.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls>DCID-1, EBCR-1, ECSC-1</IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Create MOUs, MOAs, and/or SLAs with other interconnected organizations, and then gain approval from the organization’s Authorizing Official and add the documentation to the accreditation package.Verify Authorizing Official-approved MOAs, MOUs, and SLAs are up to date and included with the organization's accreditation package. If the organization does not have MOAs, MOUs, and/or SLAs with the accreditation package, this is a finding.ENTD0360 - Test and development data not securely downloaded.<GroupDescription></GroupDescription>ENTD0360Data used for testing and development must be downloaded through a secure connection to an IA-compliant system for vulnerability scanning prior to deployment in the test and development environment.<VulnDiscussion>It is mandatory that data from an untrusted network or website that is to be used in a testing and development environment be downloaded through a secure perimeter. Bringing data directly from an untrusted network or downloaded from a personal computer or home Internet connection must be prohibited. Scanning data is crucial to ensure the integrity of the information prior to deployment for T&D processes. While not an all-inclusive list, data in this situation includes OS patches, application updates, operating systems, development tools, and test data. In the T&D environment, there will typically be one or more IA-compliant systems accessing a secure Internet connection. If a secure Internet connection is not available, such as in Zone D, a connection in another zone can be used and the data moved by approved physical media into the zone. Scanning the data with an anti-virus program will reduce the risk of exploits and of having vulnerable systems in the T&D environment taken over. Downloading data from a single workstation for all zone environments is acceptable. Organizations with NIPRNet connections must download all data through their NIPR connection for scanning at the IAPs. Contractors or other DoD organizations without any direct NIPRNet connectivity will need to use a secure Internet connection following all applicable DoD IA policy and STIG requirements. </VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C11331. Deploy an IA-compliant system to download data.
2. Configure the IA-compliant system to download data through a secure, IA-compliant connection.
A. If your organization has a NIPRNet or connection; data must be downloaded through the DoD IAP.
B. If your organization does not have a NIPRNet or connection, data must be downloaded through a secure, IA-compliant connection.1. Verify an IA-compliant system has been deployed to scan downloaded data prior to deployment into the T&D environment. Also, review the zone diagrams to ensure the workstation is documented appropriately.
2. Determine if the organization has a NIPRNet connection.
A. If the organization has a NIPRNet connection; data must be downloaded through the DoD IAP.
B. If the organization does not have a NIPRNet connection, data must be downloaded through a secure, IA-compliant connection.
If the organization does not download and scan the downloaded data to a dedicated IA-system and secure IA-compliant connection, this is a finding.ENTD0370 - Policy and procedures document not created for proper data handling.<GroupDescription></GroupDescription>ENTD0370The organization must create a policy and procedures document for proper handling and transport of data entering (physically or electronically) the test and development environment.<VulnDiscussion>Without policies and procedures in place, the organization will not have the authority to hold personnel accountable for improperly handling or transporting data into the test and development environment. The documents need to include guidance for both physical and electronic data migration.</VulnDiscussion><FalsePositives></FalsePositives><FalseNegatives></FalseNegatives><Documentable>false</Documentable><Mitigations></Mitigations><SeverityOverrideGuidance></SeverityOverrideGuidance><PotentialImpacts></PotentialImpacts><ThirdPartyTools></ThirdPartyTools><MitigationControl></MitigationControl><Responsibility></Responsibility><IAControls></IAControls>DPMS Target Test Enclave - Zone CDISADPMS TargetTest Enclave - Zone C1133Create a policy for, and document the procedure of, proper handling of data transported into the test and development environment. This document must include information for physical and electronic handling and migration of data.Review the organization's policies and procedures document to ensure proper handling of data being transported into the test and development environment. This document must include information for physical and electronic migration of data.
If the organization does not have a policy and procedures document created or available for review, this is a finding.