Symantec ProxySG must produce audit records containing information to establish the outcome of the events.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-94253	SYMP-AG-000190	SV-104207r1_rule		Medium

Description
Without information about the outcome of events, security personnel cannot make an accurate assessment as to whether an attack was successful or if changes were made to the security state of the network. Event outcomes can include indicators of event success or failure and event-specific results (e.g., the security state of the network after the event occurred). They also provide a means to measure the impact of an event and help authorized personnel to determine the appropriate response. This requirement does not apply to audit logs generated on behalf of the device itself (management).

Description

Without information about the outcome of events, security personnel cannot make an accurate assessment as to whether an attack was successful or if changes were made to the security state of the network. Event outcomes can include indicators of event success or failure and event-specific results (e.g., the security state of the network after the event occurred). They also provide a means to measure the impact of an event and help authorized personnel to determine the appropriate response. This requirement does not apply to audit logs generated on behalf of the device itself (management).

STIG	Date
Symantec ProxySG ALG Security Technical Implementation Guide	2020-03-27

Details

Check Text ( C-93439r1_chk )
Verify that the ProxySG is configured to log user web traffic for auditing that includes information about the outcome of the event. 1. Log on to the Web Management Console. 2. Browse to "Configuration" and click "Access Logging". Verify that "Enable Access Logging" is checked. 3. Browse to "Access Logging", click "General", and note which Default Log is indicated for the HTTP protocol ("main" by default). 4. Click "Formats", select the Default Log from step 3, and click "Edit/View". 5. Review the log format string and verify that at least the following variables are included: s-action rs-response-line rs-status sc-status x-exception-reason duration If Access Logging is not enabled and/or the specified log variables are not included, this is a finding.

Check Text ( C-93439r1_chk )

Verify that the ProxySG is configured to log user web traffic for auditing that includes information about the outcome of the event.

1. Log on to the Web Management Console.
2. Browse to "Configuration" and click "Access Logging". Verify that "Enable Access Logging" is checked.
3. Browse to "Access Logging", click "General", and note which Default Log is indicated for the HTTP protocol ("main" by default).
4. Click "Formats", select the Default Log from step 3, and click "Edit/View".
5. Review the log format string and verify that at least the following variables are included:
s-action
rs-response-line
rs-status
sc-status
x-exception-reason
duration

If Access Logging is not enabled and/or the specified log variables are not included, this is a finding.

Fix Text (F-100369r1_fix)
Configure the ProxySG to log user web traffic for auditing that includes information about the outcome of the event. 1. Log on to the Web Management Console. 2. Browse to "Configuration" and click "Access Logging". Check "Enable Access Logging" and click "Apply". 3. Browse to "Access Logging", click "General", and note which Default Log is indicated for the HTTP protocol ("main" by default). 4. Click "Formats", select the Default Log from step 3, and click "Edit/View". 5. Edit the log format string to include at least the following variables: s-action rs-response-line rs-status sc-status x-exception-reason duration 6. Click OK >> Apply.

Fix Text (F-100369r1_fix)

Configure the ProxySG to log user web traffic for auditing that includes information about the outcome of the event.

1. Log on to the Web Management Console.
2. Browse to "Configuration" and click "Access Logging". Check "Enable Access Logging" and click "Apply".
3. Browse to "Access Logging", click "General", and note which Default Log is indicated for the HTTP protocol ("main" by default).
4. Click "Formats", select the Default Log from step 3, and click "Edit/View".
5. Edit the log format string to include at least the following variables:
s-action
rs-response-line
rs-status
sc-status
x-exception-reason
duration
6. Click OK >> Apply.