The system must be configured to send audit records to a remote audit server.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-24357	GEN002870	SV-45564r2_rule	ECTB-1	Low

Description
Audit records contain evidence that can be used in the investigation of compromised systems. To prevent this evidence from compromise, it must be sent to a separate system continuously. Methods for sending audit records include, but are not limited to, system audit tools used to send logs directly to another host or through the system's syslog service to another host.

STIG	Date
SUSE Linux Enterprise Server v11 for System z	2015-01-26

Details

Check Text ( C-42914r3_chk )
Verify the system is configured to forward all audit records to a remote server. If the system is not configured to provide this function, this is a finding. Procedure: Ensure the audit option for the kernel is enabled. # cat /proc/cmdline \| tr ' ' '\n' \| grep -i audit If the kernel does not have the "audit=1" option specified, this is a finding. Ensure the kernel auditing is active. # /sbin/auditctl -s \| tr ' ' '\n' \| egrep 'enabled\|pid' When auditing is active, the “enabled” value is set to 1 and the “pid” value will be greater than 0. If the "enabled" setting is either missing or not set to "1", this is a finding. If the “pid” setting is 0, the audit daemon is not running and this is also a finding. Ensure the syslog plugin is active for the audit dispatch daemon. # grep "active" /etc/audisp/plugins.d/syslog.conf \| grep -v "^#" If the "active" setting is either missing or not set to "yes", this is a finding. Ensure all audit records are fowarded to a remote server. # grep "\.\" /etc/syslog.conf \|grep "@" \| grep -v "^#" (for syslog) or: # grep "\.\" /etc/rsyslog.conf \| grep "@" \| grep -v "^#" (for rsyslog) If neither of these lines exist, it is a finding.

Check Text ( C-42914r3_chk )

Verify the system is configured to forward all audit records to a remote server. If the system is not configured to provide this function, this is a finding.

Procedure:
Ensure the audit option for the kernel is enabled.

# cat /proc/cmdline | tr ' ' '\n' | grep -i audit

If the kernel does not have the "audit=1" option specified, this is a finding.

Ensure the kernel auditing is active.

# /sbin/auditctl -s | tr ' ' '\n' | egrep 'enabled|pid'
When auditing is active, the “enabled” value is set to 1 and the “pid” value will be greater than 0.
If the "enabled" setting is either missing or not set to "1", this is a finding.
If the “pid” setting is 0, the audit daemon is not running and this is also a finding.

Ensure the syslog plugin is active for the audit dispatch daemon.

# grep "active" /etc/audisp/plugins.d/syslog.conf | grep -v "^#"

If the "active" setting is either missing or not set to "yes", this is a finding.

Ensure all audit records are fowarded to a remote server.

# grep "\*.\*" /etc/syslog.conf |grep "@" | grep -v "^#" (for syslog)
or:
# grep "\*.\*" /etc/rsyslog.conf | grep "@" | grep -v "^#" (for rsyslog)

If neither of these lines exist, it is a finding.

Fix Text (F-38961r2_fix)
Configure the system to send audit records to a remote server. Procedure: These instructions assume a known remote audit server is available to this system. Add ‘audit=1’ to parameters line for the active kernel in the /etc/zipl.conf file. OR Add ‘audit=1’ as a line in the file referenced by the parmfile option for the active kernel in the /etc/zipl.conf file. An update to the boot configuration parameters requires a system restart to activate the change. Edit the "active" line in /etc/audisp/plugins.d/syslog.conf so it shows "active = yes". Modify /etc/rsyslog.conf to contain a line sending all audit records to a remote audit server. The server is specified by placing an "@" before the DNS name or IP address in the line. . @ Restart audit and syslog: # rcauditd restart # rcsyslog restart OR # service auditd restart # service syslog restart

Fix Text (F-38961r2_fix)

Configure the system to send audit records to a remote server.

Procedure:
These instructions assume a known remote audit server is available to this system.

Add ‘audit=1’ to parameters line for the active kernel in the /etc/zipl.conf file.
OR
Add ‘audit=1’ as a line in the file referenced by the parmfile option for the active kernel in the /etc/zipl.conf file.
An update to the boot configuration parameters requires a system restart to activate the change.
Edit the "active" line in /etc/audisp/plugins.d/syslog.conf so it shows "active = yes".

Modify /etc/rsyslog.conf to contain a line sending all audit records to a remote audit server. The server is specified by placing an "@" before the DNS name or IP address in the line.

*.* @

Restart audit and syslog:
# rcauditd restart
# rcsyslog restart
OR
# service auditd restart
# service syslog restart