The system must use an appropriate reverse-path filter for IPv6 network traffic, if the system uses IPv6.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-22552	GEN007900	SV-46104r1_rule	ECSC-1	Medium

Description
Reverse-path filtering provides protection against spoofed source addresses by causing the system to discard packets with source addresses for which the system has no route or if the route does not point towards the interface on which the packet arrived. Depending on the role of the system, reverse-path filtering may cause legitimate traffic to be discarded and, therefore, should be used with a more permissive mode or filter, or not at all. Whenever possible, reverse-path filtering should be used.

Description

Reverse-path filtering provides protection against spoofed source addresses by causing the system to discard packets with source addresses for which the system has no route or if the route does not point towards the interface on which the packet arrived. Depending on the role of the system, reverse-path filtering may cause legitimate traffic to be discarded and, therefore, should be used with a more permissive mode or filter, or not at all. Whenever possible, reverse-path filtering should be used.

STIG	Date
SUSE Linux Enterprise Server v11 for System z	2012-12-13

Details

Check Text ( C-43362r2_chk )
Reverse Path filtering for IPv6 is not implemented in SLES.

Fix Text (None)
None