UCF STIG Viewer Logo

The SUSE operating system must not allow interfaces to send Internet Protocol version 4 (IPv4) Internet Control Message Protocol (ICMP) redirect messages by default.


Overview

Finding ID Version Rule ID IA Controls Severity
V-235022 SLES-15-040360 SV-235022r622137_rule Medium
Description
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table, possibly revealing portions of the network topology.
STIG Date
SUSE Linux Enterprise Server 15 Security Technical Implementation Guide 2021-11-30

Details

Check Text ( C-38210r619335_chk )
Verify the SUSE operating system does not allow interfaces to perform IPv4 ICMP redirects by default.

Check the value of the default IPv4 send_redirects variable with the following command:

> sudo sysctl net.ipv4.conf.default.send_redirects
net.ipv4.conf.default.send_redirects = 0

If the network parameter "ipv4.conf.default.send_redirects" is not equal to "0" or nothing is returned, this is a finding.
Fix Text (F-38173r619336_fix)
Configure the SUSE operating system to not allow interfaces to perform IPv4 ICMP redirects by default by running the following command as an administrator:

> sudo sysctl -w net.ipv4.conf.default.send_redirects=0

If "0" is not the system's default value, add or update the following line in "/etc/sysctl.d/99-stig.conf":

> sudo sh -c 'echo "net.ipv4.conf.default.send_redirects=0" >> /etc/sysctl.d/99-stig.conf'

> sudo sysctl --system