The default zone visibility setting is not set to “none”.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-6605	SAN03.003.00	SV-6724r1_rule		Medium

Description
If the default zone visibility setting is set to "none", new clients brought into the SAN will not be allowed access to any SAN zone they are not explicitly placed into. The IAO/NSO will ensure that the default zone visibility setting, if available, is set to “none”.

STIG	Date
Storage Area Network STIG	2018-10-03

Details

Check Text ( C-2429r1_chk )
Reviewer with the assistance of the IAO/NSO, verify that the default zone visibility setting is set to “none”.. If this setting is not available mark this check as N/A.

Fix Text (F-6189r1_fix)
Locate all clients that have not been explicitly placed into a zone. Create a plan to explicitly place these clients into the correct zone(s) and after doing so the plan will include the modification of the default zone visibility setting to “none”. Obtain CM approval of the plan and then, following the plan, reconfigure the SAN to allow for the default zone visibility setting to be set to “none”.

Fix Text (F-6189r1_fix)

Locate all clients that have not been explicitly placed into a zone. Create a plan to explicitly place these clients into the correct zone(s) and after doing so the plan will include the modification of the default zone visibility setting to “none”. Obtain CM approval of the plan and then, following the plan, reconfigure the SAN to allow for the default zone visibility setting to be set to “none”.