The system must use initial TCP sequence numbers most resistant to sequence number guessing attacks.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-12001	GEN003580	SV-27416r1_rule	ECSC-1	Medium

Description
One use of initial TCP sequence numbers is to verify bidirectional communication between two hosts, which provides some protection against spoofed source addresses being used by the connection originator. If the initial TCP sequence numbers for a host can be determined by an attacker, it may be possible to establish a TCP connection from a spoofed source address without bidirectional communication.

Description

One use of initial TCP sequence numbers is to verify bidirectional communication between two hosts, which provides some protection against spoofed source addresses being used by the connection originator. If the initial TCP sequence numbers for a host can be determined by an attacker, it may be possible to establish a TCP connection from a spoofed source address without bidirectional communication.

STIG	Date
Solaris 9 SPARC Security Technical Implementation Guide	2013-01-10

Details

Check Text ( C-28602r1_chk )
# grep "TCP_STRONG_ISS=2" /etc/default/inetinit If this variable is not set, this is a finding.

Fix Text (F-24688r1_fix)
Edit /etc/default/inetinit and set the TCP_STRONG_ISS parameter to 2.