The site will have a Wireless Remote Access Policy that has been signed by the site DAA, Commander, Director, or other appropriate managers.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-25035	WIR-WRA-002	SV-30837r1_rule	ECWN-1	Low

Description
Wireless clients and the DoD network could be compromised and DoD data could be compromised if operational policies for the use of wireless remote access are not documented by the site.

STIG	Date
Smartphone Policy Security Technical Implementation Guide	2011-04-08

Details

Check Text ( C-31259r1_chk )
Detailed Policy Requirements: A site's Remote Access Policy will be written and signed by the site DAA, Commander, Director, or other appropriate manager. Recommend the policy include required security controls for the DoD-owned/operated wireless client (laptop or PDA): - Device unlock password requirements - Anti-virus application - Personal firewall - Client software patches kept up to date - Internet browsing though enterprise Internet gateway - Device security policy managed by centrally-managed policy manager - Anti-spyware app (recommended) - Procedures after client is lost or stolen or other security incident occurs - Host-based wireless intrusion detection and prevention system (WIDPS)/monitor WIDPS - Configuration requirements of wireless client - Home WLAN authentication requirements. - Home WLAN SSID requirements. - Separate WLAN access point required for home WLAN - 8+-character authentication password required for home WLAN. - Use of third-party Internet portals (kiosks) (approved or not approved) - Use of personally-owned or contractor-owned client devices (approved or not approved) - Implementation of health check of client device before connection is allowed - Places where remote access is approved (Home, Hotels, Airport, etc.) - Roles and responsibilities: --Which users or groups of users are and are not authorized to use organization's WLANs --Which parties are authorized and responsible for installing and configuring APs and other WLAN equipment - WLAN infrastructure security --Physical security requirements for WLANs and WLAN devices, including limitations on the service areas of WLANs --Types of information that may and may not be sent over WLANs, including acceptable use guidelines - WLAN client device security: --The conditions under which WLAN client devices are and are not allowed to be used and operated. --Standard hardware and software configurations that must be implemented on WLAN client devices to ensure the appropriate level of security. --Limitations on how and when WLAN clients device may be used, such as specific locations. - Guidelines on reporting losses of WLAN client devices and reporting WLAN security incidents - Guidelines for the protection of WLAN client devices to reduce theft Check Procedures: Interview the IAO and/or the site wireless device administrator and determine if the site has a wireless remote access policy (or a wireless section in a general remote access policy). Verify the policy has been signed by the site DAA, Commander, Director, or other appropriate managers. Mark as a finding if a wireless remote access policy does not exist or is not signed.

Check Text ( C-31259r1_chk )

Detailed Policy Requirements:

A site's Remote Access Policy will be written and signed by the site DAA, Commander, Director, or other appropriate manager. Recommend the policy include required security controls for the DoD-owned/operated wireless client (laptop or PDA):

- Device unlock password requirements - Anti-virus application

- Personal firewall

- Client software patches kept up to date - Internet browsing though enterprise Internet gateway

- Device security policy managed by centrally-managed policy manager

- Anti-spyware app (recommended)

- Procedures after client is lost or stolen or other security incident occurs

- Host-based wireless intrusion detection and prevention system (WIDPS)/monitor WIDPS

- Configuration requirements of wireless client - Home WLAN authentication requirements.

- Home WLAN SSID requirements.

- Separate WLAN access point required for home WLAN

- 8+-character authentication password required for home WLAN.

- Use of third-party Internet portals (kiosks) (approved or not approved)

- Use of personally-owned or contractor-owned client devices (approved or not approved)

- Implementation of health check of client device before connection is allowed

- Places where remote access is approved (Home, Hotels, Airport, etc.)

- Roles and responsibilities:
--Which users or groups of users are and are not authorized to use organization's WLANs
--Which parties are authorized and responsible for installing and configuring APs and other WLAN equipment

- WLAN infrastructure security
--Physical security requirements for WLANs and WLAN devices, including limitations on the service areas of WLANs
--Types of information that may and may not be sent over WLANs, including acceptable use guidelines

- WLAN client device security:
--The conditions under which WLAN client devices are and are not allowed to be used and operated.
--Standard hardware and software configurations that must be implemented on WLAN client devices to ensure the appropriate level of security.
--Limitations on how and when WLAN clients device may be used, such as specific locations.

- Guidelines on reporting losses of WLAN client devices and reporting WLAN security incidents

- Guidelines for the protection of WLAN client devices to reduce theft

Check Procedures:

Interview the IAO and/or the site wireless device administrator and determine if the site has a wireless remote access policy (or a wireless section in a general remote access policy). Verify the policy has been signed by the site DAA, Commander, Director, or other appropriate managers. Mark as a finding if a wireless remote access policy does not exist or is not signed.

Fix Text (F-27725r1_fix)
Publish required policy.