Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The SUSE operating system must not allow interfaces to send Internet Protocol version 4 (IPv4) Internet Control Message Protocol (ICMP) redirect messages by default.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-217294 | SLES-12-030410 | SV-217294r505931_rule | Medium |
| Description |
|---|
| ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table, possibly revealing portions of the network topology. |
| STIG | Date |
|---|---|
| SLES 12 Security Technical Implementation Guide | 2020-09-10 |
Details
| Check Text ( C-18522r370038_chk ) |
|---|
| Verify the SUSE operating system does not allow interfaces to perform IPv4 ICMP redirects by default. Check the value of the "default send_redirects" variables with the following command: # sysctl net.ipv4.conf.default.send_redirects net.ipv4.conf.default.send_redirects = 0 If the returned line does not have a value of "0” this is a finding. |
| Fix Text (F-18520r370039_fix) |
|---|
| Configure the SUSE operating system to not allow interfaces to perform IPv4 ICMP redirects by default. Set the system to the required kernel parameter by adding the following line to "/etc/sysctl.conf" (or modify the line to have the required value): net.ipv4.conf.default.send_redirects=0 Run the following command to apply this value: # sysctl --system |