UCF STIG Viewer Logo

The SEL-2740S must be configured to capture flows for real-time visualization tools.


Overview

Finding ID Version Rule ID IA Controls Severity
V-92319 SELS-SW-000080 SV-102407r1_rule Medium
Description
Without the capability to remotely view/hear all content related to a user session, investigations into suspicious user activity would be hampered. Real-time monitoring allows authorized personnel to take action before additional damage is done. The ability to observe user sessions as they are happening allows for interceding in ongoing events that after-the-fact review of captured content would not allow.
STIG Date
SEL-2740S L2S Security Technical Implementation Guide 2019-05-06

Details

Check Text ( C-91615r1_chk )
Review the SEL-2740S flow rules to ensure they only include the specific copy rules for capturing ingress and egress flows only on the designated port(s).

Note: A span port can be created to capture based on Flows, ports, or combination.

If the SEL-2740S is configured with flows with wildcard or unnecessary packet forwarding rules, this is a finding.
Fix Text (F-98557r2_fix)
Add specific SEL-2740S flow rules for capturing a copy of packets for user sessions use OpenFlow ALL Groups.

To add an SEL-2740S Group, do the following:
1. Log on to OTSDN Controller using Permission Level 3.
2. Under "Group Entry" General settings, select "Group ID" and "Group Type". Use a unique group ID and use an ALL group to send the packet to more than one destination.
3. Select appropriate number of Action Buckets dependent upon use case.
4. Determine valid watch port or group, and select supported actions.
5. Click "Submit".