Samsung Android 8 with Knox must be configured to display the DoD advisory warning message at start-up or each time the user unlocks the device.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-80403	KNOX-08-020400	SV-95107r1_rule		Low

Description
The Samsung Android 8 with Knox is required to display the DoD-approved system use notification message or banner before granting access to the system that provides privacy and security notices consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. Required banners help ensure that DoD can audit and monitor the activities of mobile device users without legal restriction. System use notification messages can be displayed when individuals first access or unlock the mobile device. The banner must be implemented as a "click-through" banner at device unlock (to the extent permitted by the operating system). A "click-through" banner prevents further activity on the information system unless and until the user executes a positive action to manifest agreement by clicking on a box indicating "OK." The approved DoD text must be used exactly as required in the KS referenced in DoDI 8500.01. For devices accommodating banners of 1300 characters, the banner text is: You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details. For devices with severe character limitations, the banner text is: I've read & consent to terms in IS user agreem't. The Administrator must configure the banner text exactly as written without any changes. SFR ID: FMT_SMF_EXT.1.1 #36

Description

The Samsung Android 8 with Knox is required to display the DoD-approved system use notification message or banner before granting access to the system that provides privacy and security notices consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. Required banners help ensure that DoD can audit and monitor the activities of mobile device users without legal restriction. System use notification messages can be displayed when individuals first access or unlock the mobile device. The banner must be implemented as a "click-through" banner at device unlock (to the extent permitted by the operating system). A "click-through" banner prevents further activity on the information system unless and until the user executes a positive action to manifest agreement by clicking on a box indicating "OK." The approved DoD text must be used exactly as required in the KS referenced in DoDI 8500.01. For devices accommodating banners of 1300 characters, the banner text is: You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details. For devices with severe character limitations, the banner text is: I've read & consent to terms in IS user agreem't. The Administrator must configure the banner text exactly as written without any changes. SFR ID: FMT_SMF_EXT.1.1 #36

STIG	Date
Samsung Android OS 8 with Knox 3.x COPE Use Case Security Technical Implementation Guide	2019-10-01

Details

Check Text ( C-80075r1_chk )
The DoD warning banner can be displayed by either of the following methods (required text is found in the Vulnerability Discussion): 1. By placing the DoD warning banner text in the user agreement signed by each Samsung device user (preferred method) 2. By configuring the required banner text on the MDM console and pushing the security policy with the banner to each managed device Determine which method is used at the Samsung device site and follow the appropriate validation procedure below. Validation Procedure for Method #1: Review the signed user agreements for several Samsung device users and verify the agreement includes the required DoD warning banner text. Validation Procedure for Method #2: This validation procedure is performed on both the MDM Administration Console and the Samsung Android 8 with Knox device. On the MDM console, do the following: 1. Ask the MDM Administrator to display the "Banner Text" field in the "DoD Banner" settings in the "Android Security" rule. 2. Verify the correct DoD-specified warning text is displayed in the Banner Text field or the field is blank. 3. Ask the MDM Administrator to display the enable check box in the "DoD Banner" settings in the "Android Security" rule. 4. Verify the check box is selected. On the Samsung Android 8 with Knox device, do the following: 1. Reboot the device. 2. Verify the device displays the DoD banner. 3. Verify the DoD banner is set to one of the authorized messages. If for Method #1, the required warning banner text is not on all signed user agreements reviewed, this is a finding. If for Method #2, the MDM console "DoD Banner" enable check box is not selected, or the "Banner Text" is not set to the appropriate designated wording, or the Samsung Android 8 with Knox device does not display a warning banner with the appropriate designated wording when rebooted, this is a finding.

Check Text ( C-80075r1_chk )

The DoD warning banner can be displayed by either of the following methods (required text is found in the Vulnerability Discussion):

1. By placing the DoD warning banner text in the user agreement signed by each Samsung device user (preferred method)
2. By configuring the required banner text on the MDM console and pushing the security policy with the banner to each managed device

Determine which method is used at the Samsung device site and follow the appropriate validation procedure below.

Validation Procedure for Method #1:
Review the signed user agreements for several Samsung device users and verify the agreement includes the required DoD warning banner text.

Validation Procedure for Method #2:
This validation procedure is performed on both the MDM Administration Console and the Samsung Android 8 with Knox device.

On the MDM console, do the following:
1. Ask the MDM Administrator to display the "Banner Text" field in the "DoD Banner" settings in the "Android Security" rule.
2. Verify the correct DoD-specified warning text is displayed in the Banner Text field or the field is blank.
3. Ask the MDM Administrator to display the enable check box in the "DoD Banner" settings in the "Android Security" rule.
4. Verify the check box is selected.

On the Samsung Android 8 with Knox device, do the following:
1. Reboot the device.
2. Verify the device displays the DoD banner.
3. Verify the DoD banner is set to one of the authorized messages.

If for Method #1, the required warning banner text is not on all signed user agreements reviewed, this is a finding.

If for Method #2, the MDM console "DoD Banner" enable check box is not selected, or the "Banner Text" is not set to the appropriate designated wording, or the Samsung Android 8 with Knox device does not display a warning banner with the appropriate designated wording when rebooted, this is a finding.

Fix Text (F-87209r1_fix)
Configure the DoD warning banner by either of the following methods (required text is found in the Vulnerability Discussion): 1. Place the DoD warning banner text in the user agreement signed by each Samsung device user. 2. Configure Samsung Android 8 with Knox to display the DoD-mandated warning banner text. On the MDM console, do the following: 1. Enter the correct text in the "Banner Text" field in the "DoD Banner" settings in the "Android Security" rule. 2. Select the "Enable" check box in the "DoD Banner" settings in the "Android Security" rule. Note: If enabled without configuring the "Banner Text", the device will display a default text that matches the required DoD banner. Note: On some MDM vendor consoles, the logon banner automatically is displayed upon reboot while the device is MDM enrolled. On these consoles, this control is not configurable through the MDM server or on the device.

Fix Text (F-87209r1_fix)

Configure the DoD warning banner by either of the following methods (required text is found in the Vulnerability Discussion):

1. Place the DoD warning banner text in the user agreement signed by each Samsung device user.
2. Configure Samsung Android 8 with Knox to display the DoD-mandated warning banner text.

On the MDM console, do the following:
1. Enter the correct text in the "Banner Text" field in the "DoD Banner" settings in the "Android Security" rule.
2. Select the "Enable" check box in the "DoD Banner" settings in the "Android Security" rule.

Note: If enabled without configuring the "Banner Text", the device will display a default text that matches the required DoD banner.

Note: On some MDM vendor consoles, the logon banner automatically is displayed upon reboot while the device is MDM enrolled. On these consoles, this control is not configurable through the MDM server or on the device.