Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-258642 | KNOX-14-110170 | SV-258642r931126_rule | Medium |
Description |
---|
Determining the correct time a particular application event occurred on a system is critical when conducting forensic analysis and investigating system events. Periodically synchronizing internal clocks with an authoritative time source is necessary to correctly correlate the timing of events that occur across the enterprise. The three authoritative time sources for Samsung Android are an authoritative time server that is synchronized with redundant United States Naval Observatory (USNO) time servers as designated for the appropriate DOD network (NIPRNet or SIPRNet), the Global Positioning System (GPS), or the wireless carrier. Time stamps generated by the audit system in Samsung Android must include both date and time. The time may be expressed in Coordinated Universal Time (UTC), a modern continuation of Greenwich Mean Time (GMT), or local time with an offset from UTC. SFR ID: FMT_MOF_EXT.1.2 #47 |
STIG | Date |
---|---|
Samsung Android OS 14 with Knox 3.x COBO Security Technical Implementation Guide | 2023-10-18 |
Check Text ( C-62382r931124_chk ) |
---|
Review the configuration to determine if the Samsung Android devices disallow users from changing the date and time. This validation procedure is performed on both the management tool and the Samsung Android device. On the management tool, in the device restrictions, verify "Configure Date/Time" is set to "Disallow". On the Samsung Android device: 1. Open Settings >> General management >> Date and time. 2. Verify "Automatic data and time" is on and the user cannot disable it. If on the management tool "Configure Date/Time" is not set to "Disallow", or on the Samsung Android device "Automatic date and time" is not set or the user can disable it, this is a finding. |
Fix Text (F-62291r931125_fix) |
---|
Configure the Samsung Android devices to disallow users from changing the date and time. On the management tool, in the device restrictions, set "Configure Date/Time" to "Disallow". |