UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

The MPLS router must be configured to synchronize IGP and LDP to minimize packet loss when an IGP adjacency is established prior to LDP peers completing label exchange.


Overview

Finding ID Version Rule ID IA Controls Severity
V-78287 SRG-NET-000512-RTR-000003 SV-92993r1_rule Low
Description
Packet loss can occur when an IGP adjacency is established and the router begins forwarding packets using the new adjacency before the LDP label exchange completes between the peers on that link. Packet loss can also occur if an LDP session closes and the router continues to forward traffic using the link associated with the LDP peer rather than an alternate pathway with a fully synchronized LDP session. The MPLS LDP-IGP Synchronization feature provides a means to synchronize LDP with OSPF or IS-IS to minimize MPLS packet loss. When an IGP adjacency is established on a link but LDP-IGP synchronization is not yet achieved or is lost, the IGP will advertise the max-metric on that link.
STIG Date
Router Security Requirements Guide 2018-01-26

Details

Check Text ( C-77845r1_chk )
Review the router OSPF or IS-IS configuration.

Verify that LDP will synchronize with the link-state routing protocol.

If the router is not configured to synchronize IGP and LDP, this is a finding.
Fix Text (F-85015r1_fix)
Configure the MPLS router to synchronize IGP and LDP, minimizing packet loss when an IGP adjacency is established prior to LDP peers completing label exchange.