The router must configure the maximum hop limit value to at least 32.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-55777 | SRG-NET-000205-RTR-000108 | SV-70031r1_rule | Medium |
| Description |
|---|
| The Neighbor Discovery protocol allows a hop limit value to be advertised by routers in a Router Advertisement message to be used by hosts instead of the standardized default value. If a very small value was configured and advertised to hosts on the LAN segment, communications would fail due to the hop limit reaching zero before the packets sent by a host reached their destination. |
| STIG | Date |
|---|---|
| Router Security Requirements Guide | 2016-07-01 |
Details
| Check Text ( C-56343r1_chk ) |
|---|
| Review the router configuration to determine if the maximum hop limit has been configured. If it has been configured, then it must be set to at least 32. If it has not been configured, it must be determined what the default value is. If the default value is below 32 and the maximum hop limit value has not been configured (set to at least 32), this is a finding. In any case, maximum hop limit must be at least 32. |
| Fix Text (F-60647r1_fix) |
|---|
| Configure the router maximum hop limit value to at least 32. |