OpenShift must disable root and terminate network connections.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-257540	CNTR-OS-000400	SV-257540r960969_rule		High

Description
Direct login as the "root" user must be disabled to prevent unrestricted access and control over the entire system. Terminating an idle session within a short time reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at the operating system level, or de-allocating networking assignments at the application level if multiple application sessions are using a single operating system level network connection. This does not mean that the application terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session. Satisfies: SRG-APP-000148-CTR-000335, SRG-APP-000190-CTR-000500

Description

Direct login as the "root" user must be disabled to prevent unrestricted access and control over the entire system. Terminating an idle session within a short time reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. In addition, quickly terminating an idle session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, de-allocating associated TCP/IP address/port pairs at the operating system level, or de-allocating networking assignments at the application level if multiple application sessions are using a single operating system level network connection. This does not mean that the application terminates all sessions or network access; it only ends the inactive session and releases the resources associated with that session. Satisfies: SRG-APP-000148-CTR-000335, SRG-APP-000190-CTR-000500

STIG	Date
Red Hat OpenShift Container Platform 4.12 Security Technical Implementation Guide	2024-06-10

Details

Check Text ( C-61275r921561_chk )
Verify SSH is restricted from logging on as root and network connections are terminated. Prevent logging on directly as "root" using SSH by executing the following command: for node in $(oc get node -oname); do oc debug $node -- chroot /host /bin/bash -c 'echo -n "$HOSTNAME "; grep -i PermitRootLogin /etc/ssh/sshd_config' 2>/dev/null; done If the "PermitRootLogin" keyword is set to "yes", is missing, or is commented out, this is a finding. Verify all network connections associated with SSH traffic are automatically terminated at the end of the session or after 10 minutes of inactivity. Check the "ClientAliveCountMax" and ClientAliveInterval by executing the following command: for node in $(oc get node -oname); do oc debug $node -- chroot /host /bin/bash -c 'echo -n "$HOSTNAME "; grep -i clientalive /etc/ssh/sshd_config ' 2>/dev/null; done If "ClientAliveCountMax" do not exist, is not set to a value of "0" in "/etc/ssh/sshd_config", or is commented out, this is a finding. If "ClientAliveInterval" does not exist, or has a value of > 600 in "/etc/ssh/sshd_config", or is commented out, this is a finding.

Check Text ( C-61275r921561_chk )

Verify SSH is restricted from logging on as root and network connections are terminated.

Prevent logging on directly as "root" using SSH by executing the following command:

for node in $(oc get node -oname); do oc debug $node -- chroot /host /bin/bash -c 'echo -n "$HOSTNAME "; grep -i PermitRootLogin /etc/ssh/sshd_config' 2>/dev/null; done

If the "PermitRootLogin" keyword is set to "yes", is missing, or is commented out, this is a finding.

Verify all network connections associated with SSH traffic are automatically terminated at the end of the session or after 10 minutes of inactivity.

Check the "ClientAliveCountMax" and ClientAliveInterval by executing the following command:

for node in $(oc get node -oname); do oc debug $node -- chroot /host /bin/bash -c 'echo -n "$HOSTNAME "; grep -i clientalive /etc/ssh/sshd_config
' 2>/dev/null; done

If "ClientAliveCountMax" do not exist, is not set to a value of "0" in "/etc/ssh/sshd_config", or is commented out, this is a finding.

If "ClientAliveInterval" does not exist, or has a value of > 600 in "/etc/ssh/sshd_config", or is commented out, this is a finding.

Fix Text (F-61199r921562_fix)
Apply the machine config that disables root and terminates network connections by executing the following: for mcpool in $(oc get mcp -oname \| sed "s:.*/::" ); do echo "apiVersion: machineconfiguration.openshift.io/v1 kind: MachineConfig metadata: name: 50-sshd-config-$mcpool labels: machineconfiguration.openshift.io/role: $mcpool spec: config: ignition: version: 3.1.0 storage: files: - contents: source: data:,%0A%23%09$OpenBSD:%20sshd_config%2Cv%201.103%202018%2F04%2F09%2020:41:22%20tj%20Exp%20$%0A%0A%23%20This%20is%20the%20sshd%20server%20system-wide%20configuration%20file.%20%20See%0A%23%20sshd_config%285%29%20for%20more%20information.%0A%0A%23%20This%20sshd%20was%20compiled%20with%20PATH=%2Fusr%2Flocal%2Fbin:%2Fusr%2Fbin:%2Fusr%2Flocal%2Fsbin:%2Fusr%2Fsbin%0A%0A%23%20The%20strategy%20used%20for%20options%20in%20the%20default%20sshd_config%20shipped%20with%0A%23%20OpenSSH%20is%20to%20specify%20options%20with%20their%20default%20value%20where%0A%23%20possible%2C%20but%20leave%20them%20commented.%20%20Uncommented%20options%20override%20the%0A%23%20default%20value.%0A%0A%23%20If%20you%20want%20to%20change%20the%20port%20on%20a%20SELinux%20system%2C%20you%20have%20to%20tell%0A%23%20SELinux%20about%20this%20change.%0A%23%20semanage%20port%20-a%20-t%20ssh_port_t%20-p%20tcp%20%23PORTNUMBER%0A%23%0A%23Port%2022%0A%23AddressFamily%20any%0A%23ListenAddress%200.0.0.0%0A%23ListenAddress%20::%0A%0AHostKey%20%2Fetc%2Fssh%2Fssh_host_rsa_key%0AHostKey%20%2Fetc%2Fssh%2Fssh_host_ecdsa_key%0AHostKey%20%2Fetc%2Fssh%2Fssh_host_ed25519_key%0A%0A%23%20Ciphers%20and%20keying%0ARekeyLimit%20512M%201h%0A%0A%23%20System-wide%20Crypto%20policy:%0A%23%20This%20system%20is%20following%20system-wide%20crypto%20policy.%20The%20changes%20to%0A%23%20Ciphers%2C%20MACs%2C%20KexAlgoritms%20and%20GSSAPIKexAlgorithsm%20will%20not%20have%20any%0A%23%20effect%20here.%20They%20will%20be%20overridden%20by%20command-line%20options%20passed%20on%0A%23%20the%20server%20start%20up.%0A%23%20To%20opt%20out%2C%20uncomment%20a%20line%20with%20redefinition%20of%20%20CRYPTO_POLICY=%0A%23%20variable%20in%20%20%2Fetc%2Fsysconfig%2Fsshd%20%20to%20overwrite%20the%20policy.%0A%23%20For%20more%20information%2C%20see%20manual%20page%20for%20update-crypto-policies%288%29.%0A%0A%23%20Logging%0A%23SyslogFacility%20AUTH%0ASyslogFacility%20AUTHPRIV%0A%23LogLevel%20INFO%0A%0A%23%20Authentication:%0A%0A%23LoginGraceTime%202m%0APermitRootLogin%20no%0AStrictModes%20yes%0A%23MaxAuthTries%206%0A%23MaxSessions%2010%0A%0APubkeyAuthentication%20yes%0A%0A%23%20The%20default%20is%20to%20check%20both%20.ssh%2Fauthorized_keys%20and%20.ssh%2Fauthorized_keys2%0A%23%20but%20this%20is%20overridden%20so%20installations%20will%20only%20check%20.ssh%2Fauthorized_keys%0AAuthorizedKeysFile%09.ssh%2Fauthorized_keys%0A%0A%23AuthorizedPrincipalsFile%20none%0A%0A%23AuthorizedKeysCommand%20none%0A%23AuthorizedKeysCommandUser%20nobody%0A%0A%23%20For%20this%20to%20work%20you%20will%20also%20need%20host%20keys%20in%20%2Fetc%2Fssh%2Fssh_known_hosts%0AHostbasedAuthentication%20no%0A%23%20Change%20to%20yes%20if%20you%20don%27t%20trust%20~%2F.ssh%2Fknown_hosts%20for%0A%23%20HostbasedAuthentication%0AIgnoreUserKnownHosts%20yes%0A%23%20Don%27t%20read%20the%20user%27s%20~%2F.rhosts%20and%20~%2F.shosts%20files%0AIgnoreRhosts%20yes%0A%0A%23%20To%20disable%20tunneled%20clear%20text%20passwords%2C%20change%20to%20no%20here%21%0A%23PasswordAuthentication%20yes%0APermitEmptyPasswords%20no%0APasswordAuthentication%20no%0A%0A%23%20Change%20to%20no%20to%20disable%20s%2Fkey%20passwords%0A%23ChallengeResponseAuthentication%20yes%0AChallengeResponseAuthentication%20no%0A%0A%23%20Kerberos%20options%0AKerberosAuthentication%20no%0A%23KerberosOrLocalPasswd%20yes%0A%23KerberosTicketCleanup%20yes%0A%23KerberosGetAFSToken%20no%0A%23KerberosUseKuserok%20yes%0A%0A%23%20GSSAPI%20options%0AGSSAPIAuthentication%20no%0AGSSAPICleanupCredentials%20no%0A%23GSSAPIStrictAcceptorCheck%20yes%0A%23GSSAPIKeyExchange%20no%0A%23GSSAPIEnablek5users%20no%0A%0A%23%20Set%20this%20to%20%27yes%27%20to%20enable%20PAM%20authentication%2C%20account%20processing%2C%0A%23%20and%20session%20processing.%20If%20this%20is%20enabled%2C%20PAM%20authentication%20will%0A%23%20be%20allowed%20through%20the%20ChallengeResponseAuthentication%20and%0A%23%20PasswordAuthentication.%20%20Depending%20on%20your%20PAM%20configuration%2C%0A%23%20PAM%20authentication%20via%20ChallengeResponseAuthentication%20may%20bypass%0A%23%20the%20setting%20of%20%22PermitRootLogin%20without-password%22.%0A%23%20If%20you%20just%20want%20the%20PAM%20account%20and%20session%20checks%20to%20run%20without%0A%23%20PAM%20authentication%2C%20then%20enable%20this%20but%20set%20PasswordAuthentication%0A%23%20and%20ChallengeResponseAuthentication%20to%20%27no%27.%0A%23%20WARNING:%20%27UsePAM%20no%27%20is%20not%20supported%20in%20Fedora%20and%20may%20cause%20several%0A%23%20problems.%0AUsePAM%20yes%0A%0A%23AllowAgentForwarding%20yes%0A%23AllowTcpForwarding%20yes%0A%23GatewayPorts%20no%0AX11Forwarding%20yes%0A%23X11DisplayOffset%2010%0A%23X11UseLocalhost%20yes%0A%23PermitTTY%20yes%0A%0A%23%20It%20is%20recommended%20to%20use%20pam_motd%20in%20%2Fetc%2Fpam.d%2Fsshd%20instead%20of%20PrintMotd%2C%0A%23%20as%20it%20is%20more%20configurable%20and%20versatile%20than%20the%20built-in%20version.%0APrintMotd%20no%0A%0APrintLastLog%20yes%0A%23TCPKeepAlive%20yes%0APermitUserEnvironment%20no%0ACompression%20no%0AClientAliveInterval%20600%0AClientAliveCountMax%200%0A%23UseDNS%20no%0A%23PidFile%20%2Fvar%2Frun%2Fsshd.pid%0A%23MaxStartups%2010:30:100%0A%23PermitTunnel%20no%0A%23ChrootDirectory%20none%0A%23V+G67ersionAddendum%20none%0A%0A%23%20no%20default%20banner%20path%0ABanner%20%2Fetc%2Fissue%0A%0A%23%20Accept%20locale-related%20environment%20variables%0AAcceptEnv%20LANG%20LC_CTYPE%20LC_NUMERIC%20LC_TIME%20LC_COLLATE%20LC_MONETARY%20LC_MESSAGES%0AAcceptEnv%20LC_PAPER%20LC_NAME%20LC_ADDRESS%20LC_TELEPHONE%20LC_MEASUREMENT%0AAcceptEnv%20LC_IDENTIFICATION%20LC_ALL%20LANGUAGE%0AAcceptEnv%20XMODIFIERS%0A%0A%23%20override%20default%20of%20no%20subsystems%0ASubsystem%09sftp%09%2Fusr%2Flibexec%2Fopenssh%2Fsftp-server%0A%0A%23%20Example%20of%20overriding%20settings%20on%20a%20per-user%20basis%0A%23Match%20User%20anoncvs%0A%23%09X11Forwarding%20no%0A%23%09AllowTcpForwarding%20no%0A%23%09PermitTTY%20no%0A%23%09ForceCommand%20cvs%20server%0A%0AUsePrivilegeSeparation%20sandbox mode: 0644 overwrite: true path: /etc/ssh/sshd_config " \| oc apply -f - done

Fix Text (F-61199r921562_fix)

Apply the machine config that disables root and terminates network connections by executing the following:

for mcpool in $(oc get mcp -oname | sed "s:.*/::" ); do
echo "apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
metadata:
name: 50-sshd-config-$mcpool
labels:
machineconfiguration.openshift.io/role: $mcpool
spec:
config:
ignition:
version: 3.1.0
storage:
files:
- contents:
source: data:,%0A%23%09$OpenBSD:%20sshd_config%2Cv%201.103%202018%2F04%2F09%2020:41:22%20tj%20Exp%20$%0A%0A%23%20This%20is%20the%20sshd%20server%20system-wide%20configuration%20file.%20%20See%0A%23%20sshd_config%285%29%20for%20more%20information.%0A%0A%23%20This%20sshd%20was%20compiled%20with%20PATH=%2Fusr%2Flocal%2Fbin:%2Fusr%2Fbin:%2Fusr%2Flocal%2Fsbin:%2Fusr%2Fsbin%0A%0A%23%20The%20strategy%20used%20for%20options%20in%20the%20default%20sshd_config%20shipped%20with%0A%23%20OpenSSH%20is%20to%20specify%20options%20with%20their%20default%20value%20where%0A%23%20possible%2C%20but%20leave%20them%20commented.%20%20Uncommented%20options%20override%20the%0A%23%20default%20value.%0A%0A%23%20If%20you%20want%20to%20change%20the%20port%20on%20a%20SELinux%20system%2C%20you%20have%20to%20tell%0A%23%20SELinux%20about%20this%20change.%0A%23%20semanage%20port%20-a%20-t%20ssh_port_t%20-p%20tcp%20%23PORTNUMBER%0A%23%0A%23Port%2022%0A%23AddressFamily%20any%0A%23ListenAddress%200.0.0.0%0A%23ListenAddress%20::%0A%0AHostKey%20%2Fetc%2Fssh%2Fssh_host_rsa_key%0AHostKey%20%2Fetc%2Fssh%2Fssh_host_ecdsa_key%0AHostKey%20%2Fetc%2Fssh%2Fssh_host_ed25519_key%0A%0A%23%20Ciphers%20and%20keying%0ARekeyLimit%20512M%201h%0A%0A%23%20System-wide%20Crypto%20policy:%0A%23%20This%20system%20is%20following%20system-wide%20crypto%20policy.%20The%20changes%20to%0A%23%20Ciphers%2C%20MACs%2C%20KexAlgoritms%20and%20GSSAPIKexAlgorithsm%20will%20not%20have%20any%0A%23%20effect%20here.%20They%20will%20be%20overridden%20by%20command-line%20options%20passed%20on%0A%23%20the%20server%20start%20up.%0A%23%20To%20opt%20out%2C%20uncomment%20a%20line%20with%20redefinition%20of%20%20CRYPTO_POLICY=%0A%23%20variable%20in%20%20%2Fetc%2Fsysconfig%2Fsshd%20%20to%20overwrite%20the%20policy.%0A%23%20For%20more%20information%2C%20see%20manual%20page%20for%20update-crypto-policies%288%29.%0A%0A%23%20Logging%0A%23SyslogFacility%20AUTH%0ASyslogFacility%20AUTHPRIV%0A%23LogLevel%20INFO%0A%0A%23%20Authentication:%0A%0A%23LoginGraceTime%202m%0APermitRootLogin%20no%0AStrictModes%20yes%0A%23MaxAuthTries%206%0A%23MaxSessions%2010%0A%0APubkeyAuthentication%20yes%0A%0A%23%20The%20default%20is%20to%20check%20both%20.ssh%2Fauthorized_keys%20and%20.ssh%2Fauthorized_keys2%0A%23%20but%20this%20is%20overridden%20so%20installations%20will%20only%20check%20.ssh%2Fauthorized_keys%0AAuthorizedKeysFile%09.ssh%2Fauthorized_keys%0A%0A%23AuthorizedPrincipalsFile%20none%0A%0A%23AuthorizedKeysCommand%20none%0A%23AuthorizedKeysCommandUser%20nobody%0A%0A%23%20For%20this%20to%20work%20you%20will%20also%20need%20host%20keys%20in%20%2Fetc%2Fssh%2Fssh_known_hosts%0AHostbasedAuthentication%20no%0A%23%20Change%20to%20yes%20if%20you%20don%27t%20trust%20~%2F.ssh%2Fknown_hosts%20for%0A%23%20HostbasedAuthentication%0AIgnoreUserKnownHosts%20yes%0A%23%20Don%27t%20read%20the%20user%27s%20~%2F.rhosts%20and%20~%2F.shosts%20files%0AIgnoreRhosts%20yes%0A%0A%23%20To%20disable%20tunneled%20clear%20text%20passwords%2C%20change%20to%20no%20here%21%0A%23PasswordAuthentication%20yes%0APermitEmptyPasswords%20no%0APasswordAuthentication%20no%0A%0A%23%20Change%20to%20no%20to%20disable%20s%2Fkey%20passwords%0A%23ChallengeResponseAuthentication%20yes%0AChallengeResponseAuthentication%20no%0A%0A%23%20Kerberos%20options%0AKerberosAuthentication%20no%0A%23KerberosOrLocalPasswd%20yes%0A%23KerberosTicketCleanup%20yes%0A%23KerberosGetAFSToken%20no%0A%23KerberosUseKuserok%20yes%0A%0A%23%20GSSAPI%20options%0AGSSAPIAuthentication%20no%0AGSSAPICleanupCredentials%20no%0A%23GSSAPIStrictAcceptorCheck%20yes%0A%23GSSAPIKeyExchange%20no%0A%23GSSAPIEnablek5users%20no%0A%0A%23%20Set%20this%20to%20%27yes%27%20to%20enable%20PAM%20authentication%2C%20account%20processing%2C%0A%23%20and%20session%20processing.%20If%20this%20is%20enabled%2C%20PAM%20authentication%20will%0A%23%20be%20allowed%20through%20the%20ChallengeResponseAuthentication%20and%0A%23%20PasswordAuthentication.%20%20Depending%20on%20your%20PAM%20configuration%2C%0A%23%20PAM%20authentication%20via%20ChallengeResponseAuthentication%20may%20bypass%0A%23%20the%20setting%20of%20%22PermitRootLogin%20without-password%22.%0A%23%20If%20you%20just%20want%20the%20PAM%20account%20and%20session%20checks%20to%20run%20without%0A%23%20PAM%20authentication%2C%20then%20enable%20this%20but%20set%20PasswordAuthentication%0A%23%20and%20ChallengeResponseAuthentication%20to%20%27no%27.%0A%23%20WARNING:%20%27UsePAM%20no%27%20is%20not%20supported%20in%20Fedora%20and%20may%20cause%20several%0A%23%20problems.%0AUsePAM%20yes%0A%0A%23AllowAgentForwarding%20yes%0A%23AllowTcpForwarding%20yes%0A%23GatewayPorts%20no%0AX11Forwarding%20yes%0A%23X11DisplayOffset%2010%0A%23X11UseLocalhost%20yes%0A%23PermitTTY%20yes%0A%0A%23%20It%20is%20recommended%20to%20use%20pam_motd%20in%20%2Fetc%2Fpam.d%2Fsshd%20instead%20of%20PrintMotd%2C%0A%23%20as%20it%20is%20more%20configurable%20and%20versatile%20than%20the%20built-in%20version.%0APrintMotd%20no%0A%0APrintLastLog%20yes%0A%23TCPKeepAlive%20yes%0APermitUserEnvironment%20no%0ACompression%20no%0AClientAliveInterval%20600%0AClientAliveCountMax%200%0A%23UseDNS%20no%0A%23PidFile%20%2Fvar%2Frun%2Fsshd.pid%0A%23MaxStartups%2010:30:100%0A%23PermitTunnel%20no%0A%23ChrootDirectory%20none%0A%23V+G67ersionAddendum%20none%0A%0A%23%20no%20default%20banner%20path%0ABanner%20%2Fetc%2Fissue%0A%0A%23%20Accept%20locale-related%20environment%20variables%0AAcceptEnv%20LANG%20LC_CTYPE%20LC_NUMERIC%20LC_TIME%20LC_COLLATE%20LC_MONETARY%20LC_MESSAGES%0AAcceptEnv%20LC_PAPER%20LC_NAME%20LC_ADDRESS%20LC_TELEPHONE%20LC_MEASUREMENT%0AAcceptEnv%20LC_IDENTIFICATION%20LC_ALL%20LANGUAGE%0AAcceptEnv%20XMODIFIERS%0A%0A%23%20override%20default%20of%20no%20subsystems%0ASubsystem%09sftp%09%2Fusr%2Flibexec%2Fopenssh%2Fsftp-server%0A%0A%23%20Example%20of%20overriding%20settings%20on%20a%20per-user%20basis%0A%23Match%20User%20anoncvs%0A%23%09X11Forwarding%20no%0A%23%09AllowTcpForwarding%20no%0A%23%09PermitTTY%20no%0A%23%09ForceCommand%20cvs%20server%0A%0AUsePrivilegeSeparation%20sandbox
mode: 0644
overwrite: true
path: /etc/ssh/sshd_config
" | oc apply -f -
done