RHEL 9 must have the AIDE package installed.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-258134	RHEL-09-651010	SV-258134r958794_rule		Medium

Description
Without verification of the security functions, security functions may not operate correctly, and the failure may go unnoticed. Security function is defined as the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Security functionality includes, but is not limited to, establishing system accounts, configuring access authorizations (i.e., permissions, privileges), setting events to be audited, and setting intrusion detection parameters. Satisfies: SRG-OS-000363-GPOS-00150, SRG-OS-000445-GPOS-00199

Description

Without verification of the security functions, security functions may not operate correctly, and the failure may go unnoticed. Security function is defined as the hardware, software, and/or firmware of the information system responsible for enforcing the system security policy and supporting the isolation of code and data on which the protection is based. Security functionality includes, but is not limited to, establishing system accounts, configuring access authorizations (i.e., permissions, privileges), setting events to be audited, and setting intrusion detection parameters. Satisfies: SRG-OS-000363-GPOS-00150, SRG-OS-000445-GPOS-00199

STIG	Date
Red Hat Enterprise Linux 9 Security Technical Implementation Guide	2024-06-04

Details

Check Text ( C-61875r926387_chk )
Verify that RHEL 9 has the Advanced Intrusion Detection Environment (AIDE) package installed with the following command: $ sudo dnf list --installed aide Example output: aide.x86_64 0.16.100.el9 If AIDE is not installed, ask the system administrator (SA) how file integrity checks are performed on the system. If there is no application installed to perform integrity checks, this is a finding. If AIDE is installed, check if it has been initialized with the following command: $ sudo /usr/sbin/aide --check If the output is "Couldn't open file /var/lib/aide/aide.db.gz for reading", this is a finding.

Check Text ( C-61875r926387_chk )

Verify that RHEL 9 has the Advanced Intrusion Detection Environment (AIDE) package installed with the following command:

$ sudo dnf list --installed aide

Example output:

aide.x86_64 0.16.100.el9

If AIDE is not installed, ask the system administrator (SA) how file integrity checks are performed on the system.

If there is no application installed to perform integrity checks, this is a finding.

If AIDE is installed, check if it has been initialized with the following command:

$ sudo /usr/sbin/aide --check

If the output is "Couldn't open file /var/lib/aide/aide.db.gz for reading", this is a finding.

Fix Text (F-61799r926388_fix)
Install AIDE, initialize it, and perform a manual check. Install AIDE: $ sudo dnf install aide Initialize AIDE: $ sudo /usr/sbin/aide --init Example output: Start timestamp: 2023-06-05 10:09:04 -0600 (AIDE 0.16) AIDE initialized database at /var/lib/aide/aide.db.new.gz Number of entries: 86833 --------------------------------------------------- The attributes of the (uncompressed) database(s): --------------------------------------------------- /var/lib/aide/aide.db.new.gz MD5 : coZUtPHhoFoeD7+k54fUvQ== SHA1 : DVpOEMWJwo0uPgrKZAygIUgSxeM= SHA256 : EQiZH0XNEk001tcDmJa+5STFEjDb4MPE TGdBJ/uvZKc= SHA512 : 86KUqw++PZhoPK0SZvT3zuFq9yu9nnPP toei0nENVELJ1LPurjoMlRig6q69VR8l +44EwO9eYyy9nnbzQsfG1g== End timestamp: 2023-06-05 10:09:57 -0600 (run time: 0m 53s) The new database will need to be renamed to be read by AIDE: $ sudo mv /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz Perform a manual check: $ sudo /usr/sbin/aide --check Example output: 2023-06-05 10:16:08 -0600 (AIDE 0.16) AIDE found NO differences between database and filesystem. Looks okay!! ...

Fix Text (F-61799r926388_fix)

Install AIDE, initialize it, and perform a manual check.

Install AIDE:

$ sudo dnf install aide

Initialize AIDE:

$ sudo /usr/sbin/aide --init

Example output:

Start timestamp: 2023-06-05 10:09:04 -0600 (AIDE 0.16)
AIDE initialized database at /var/lib/aide/aide.db.new.gz

Number of entries: 86833

---------------------------------------------------
The attributes of the (uncompressed) database(s):
---------------------------------------------------

/var/lib/aide/aide.db.new.gz
MD5 : coZUtPHhoFoeD7+k54fUvQ==
SHA1 : DVpOEMWJwo0uPgrKZAygIUgSxeM=
SHA256 : EQiZH0XNEk001tcDmJa+5STFEjDb4MPE
TGdBJ/uvZKc=
SHA512 : 86KUqw++PZhoPK0SZvT3zuFq9yu9nnPP
toei0nENVELJ1LPurjoMlRig6q69VR8l
+44EwO9eYyy9nnbzQsfG1g==

End timestamp: 2023-06-05 10:09:57 -0600 (run time: 0m 53s)

The new database will need to be renamed to be read by AIDE:

$ sudo mv /var/lib/aide/aide.db.new.gz /var/lib/aide/aide.db.gz

Perform a manual check:

$ sudo /usr/sbin/aide --check

Example output:

2023-06-05 10:16:08 -0600 (AIDE 0.16)
AIDE found NO differences between database and filesystem. Looks okay!!

...