UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

RHEL 9 must not forward IPv6 source-routed packets by default.


Overview

Finding ID Version Rule ID IA Controls Severity
V-257977 RHEL-09-254040 SV-257977r991589_rule Medium
Description
Source-routed packets allow the source of the packet to suggest that routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routed traffic, such as when forwarding is enabled and the system is functioning as a router. Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It must be disabled unless it is absolutely required.
STIG Date
Red Hat Enterprise Linux 9 Security Technical Implementation Guide 2024-06-04

Details

Check Text ( C-61718r943010_chk )
Verify RHEL 9 does not accept IPv6 source-routed packets by default.

Note: If IPv6 is disabled on the system, this requirement is Not Applicable.

Check the value of the accept source route variable with the following command:

$ sudo sysctl net.ipv6.conf.default.accept_source_route

net.ipv6.conf.default.accept_source_route = 0

If the returned line does not have a value of "0", a line is not returned, or the line is commented out, this is a finding.

Check that the configuration files are present to enable this network parameter.

$ sudo /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F net.ipv6.conf.default.accept_source_route | tail -1

net.ipv6.conf.default.accept_source_route = 0

If "net.ipv6.conf.default.accept_source_route" is not set to "0" or is missing, this is a finding.
Fix Text (F-61642r925917_fix)
Configure RHEL 9 to not forward IPv6 source-routed packets by default.

Add or edit the following line in a single system configuration file, in the "/etc/sysctl.d/" directory:

net.ipv6.conf.default.accept_source_route = 0

Load settings from all system configuration files with the following command:

$ sudo sysctl --system