UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

RHEL 9 must not enable IPv6 packet forwarding unless the system is a router.


Overview

Finding ID Version Rule ID IA Controls Severity
V-257974 RHEL-09-254025 SV-257974r991589_rule Medium
Description
IP forwarding permits the kernel to forward packets from one network interface to another. The ability to forward packets between two networks is only appropriate for systems acting as routers.
STIG Date
Red Hat Enterprise Linux 9 Security Technical Implementation Guide 2024-06-04

Details

Check Text ( C-61715r943004_chk )
Verify RHEL 9 is not performing IPv6 packet forwarding, unless the system is a router.

Note: If IPv6 is disabled on the system, this requirement is Not Applicable.

Check that IPv6 forwarding is disabled using the following commands:

$ sudo sysctl net.ipv6.conf.all.forwarding

net.ipv6.conf.all.forwarding = 0

If the IPv6 forwarding value is not "0" and is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding.

Check that the configuration files are present to enable this network parameter.

$ sudo /usr/lib/systemd/systemd-sysctl --cat-config | egrep -v '^(#|;)' | grep -F net.ipv6.conf.all.forwarding | tail -1

net.ipv6.conf.all.forwarding = 0

If "net.ipv6.conf.all.forwarding" is not set to "0" or is missing, this is a finding.
Fix Text (F-61639r925908_fix)
Configure RHEL 9 to not allow IPv6 packet forwarding, unless the system is a router.

Add or edit the following line in a single system configuration file, in the "/etc/sysctl.d/" directory:

net.ipv6.conf.all.forwarding = 0

Load settings from all system configuration files with the following command:

$ sudo sysctl --system