Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
RHEL 9 must not enable IPv4 packet forwarding unless the system is a router.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-257970 | RHEL-09-253075 | SV-257970r991589_rule | Medium |
| Description |
|---|
| Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network. |
| STIG | Date |
|---|---|
| Red Hat Enterprise Linux 9 Security Technical Implementation Guide | 2024-06-04 |
Details
| Check Text ( C-61711r943000_chk ) |
|---|
| Verify RHEL 9 is not performing IPv4 packet forwarding, unless the system is a router. Check that IPv4 forwarding is disabled using the following command: $ sudo sysctl net.ipv4.conf.all.forwarding net.ipv4.conf.all.forwarding = 0 If the IPv4 forwarding value is not "0" and is not documented with the information system security officer (ISSO) as an operational requirement, this is a finding. Check that the configuration files are present to enable this network parameter. $ sudo (/usr/lib/systemd/systemd-sysctl --cat-config; cat /etc/sysctl.conf) | egrep -v '^(#|$)' | grep net.ipv4.conf.all.forwarding | tail -1 net.ipv4.conf.all.forwarding = 0 If "net.ipv4.conf.all.forwarding" is not set to "0" and is not documented with the ISSO as an operational requirement or is missing, this is a finding. |
| Fix Text (F-61635r925896_fix) |
|---|
| Configure RHEL 9 to not allow IPv4 packet forwarding, unless the system is a router. Add or edit the following line in a single system configuration file, in the "/etc/sysctl.d/" directory: net.ipv4.conf.all.forwarding = 0 Load settings from all system configuration files with the following command: $ sudo sysctl --system |