Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-230338 | RHEL-08-020016 | SV-230338r627750_rule | Medium |
Description |
---|
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account. RHEL 8 can utilize the "pam_faillock.so" for this purpose. Note that manual changes to the listed files may be overwritten by the "authselect" program. From "Pam_Faillock" man pages: Note that the default directory that "pam_faillock" uses is usually cleared on system boot so the access will be reenabled after system reboot. If that is undesirable a different tally directory must be set with the "dir" option. Satisfies: SRG-OS-000021-GPOS-00005, SRG-OS-000329-GPOS-00128 |
STIG | Date |
---|---|
Red Hat Enterprise Linux 8 Security Technical Implementation Guide | 2022-12-06 |
Check Text ( C-33007r567760_chk ) |
---|
Check that the faillock directory contents persists after a reboot with the following commands: Note: If the System Administrator demonstrates the use of an approved centralized account management method that locks an account after three unsuccessful logon attempts within a period of 15 minutes, this requirement is not applicable. Note: This check applies to RHEL versions 8.0 and 8.1, if the system is RHEL version 8.2 or newer, this check is not applicable. $ sudo grep pam_faillock.so /etc/pam.d/password-auth auth required pam_faillock.so preauth dir=/var/log/faillock silent audit deny=3 even_deny_root fail_interval=900 unlock_time=0 auth required pam_faillock.so authfail dir=/var/log/faillock unlock_time=0 account required pam_faillock.so If the "dir" option is not set to a non-default documented tally log directory on the "preauth" and "authfail" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding. $ sudo grep pam_faillock.so /etc/pam.d/system-auth auth required pam_faillock.so preauth dir=/var/log/faillock silent audit deny=3 even_deny_root fail_interval=900 unlock_time=0 auth required pam_faillock.so authfail dir=/var/log/faillock unlock_time=0 account required pam_faillock.so If the "dir" option is not set to a non-default documented tally log directory on the "preauth" and "authfail" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding. |
Fix Text (F-32982r567761_fix) |
---|
Configure the operating system maintain the contents of the faillock directory after a reboot. Add/Modify the appropriate sections of the "/etc/pam.d/system-auth" and "/etc/pam.d/password-auth" files to match the following lines: Note: Using the default faillock directory of /var/run/faillock will result in the contents being cleared in the event of a reboot. auth required pam_faillock.so preauth dir=/var/log/faillock silent audit deny=3 even_deny_root fail_interval=900 unlock_time=0 auth required pam_faillock.so authfail dir=/var/log/faillock unlock_time=0 account required pam_faillock.so The "sssd" service must be restarted for the changes to take effect. To restart the "sssd" service, run the following command: $ sudo systemctl restart sssd.service |