Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
RHEL 8 must not forward IPv4 source-routed packets.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-244551 | RHEL-08-040239 | SV-244551r743902_rule | Medium |
| Description |
|---|
| Source-routed packets allow the source of the packet to suggest that routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routed traffic, such as when forwarding is enabled and the system is functioning as a router. |
| STIG | Date |
|---|---|
| Red Hat Enterprise Linux 8 Security Technical Implementation Guide | 2021-06-14 |
Details
| Check Text ( C-47826r743900_chk ) |
|---|
| Verify RHEL 8 does not accept IPv4 source-routed packets. Note: If IPv4 is disabled on the system, this requirement is Not Applicable. Check the value of the accept source route variable with the following command: $ sudo sysctl net.ipv4.conf.all.accept_source_route net.ipv4.conf.all.accept_source_route = 0 If the returned line does not have a value of "0", a line is not returned, or the line is commented out, this is a finding. |
| Fix Text (F-47783r743901_fix) |
|---|
| Configure RHEL 8 to not forward IPv4 source-routed packets with the following command: $ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0 If "0" is not the system's all value then add or update the following line in the appropriate file under "/etc/sysctl.d": net.ipv4.conf.all.accept_source_route=0 |