Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
RHEL 8 must ignore Internet Control Message Protocol (ICMP) redirect messages.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-230544 | RHEL-08-040280 | SV-230544r627750_rule | Medium |
| Description |
|---|
| ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack. |
| STIG | Date |
|---|---|
| Red Hat Enterprise Linux 8 Security Technical Implementation Guide | 2021-03-04 |
Details
| Check Text ( C-33213r568378_chk ) |
|---|
| Verify RHEL 8 ignores ICMP redirect messages. Note: If either IPv4 or IPv6 is disabled on the system, this requirement only applies to the active internet protocol version. Check the value of the "accept_redirects" variables with the following command: $ sudo sysctl net.ipv4.conf.all.accept_redirects net.ipv6.conf.all.accept_redirects net.ipv4.conf.all.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 If both of the returned lines do not have a value of "0", or a line is not returned, this is a finding. |
| Fix Text (F-33188r568379_fix) |
|---|
| Configure RHEL 8 to ignore ICMP redirect messages with the following commands: $ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0 $ sudo sysctl -w net.ipv6.conf.all.accept_redirects=0 If "0" is not the system's default value then add or update the following lines in the appropriate file under "/etc/sysctl.d": net.ipv4.conf.all.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 |