Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-230538 | RHEL-08-040240 | SV-230538r627750_rule | Medium |
Description |
---|
Source-routed packets allow the source of the packet to suggest that routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routed traffic, such as when forwarding is enabled and the system is functioning as a router. |
STIG | Date |
---|---|
Red Hat Enterprise Linux 8 Security Technical Implementation Guide | 2021-03-04 |
Check Text ( C-33207r568360_chk ) |
---|
Verify RHEL 8 does not accept source-routed packets. Note: If either IPv4 or IPv6 is disabled on the system, this requirement only applies to the active internet protocol version. Check the value of the accept source route variable with the following command: $ sudo sysctl net.ipv4.conf.all.accept_source_route net.ipv6.conf.all.accept_source_route net.ipv4.conf.all.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 If the returned lines do not have a value of "0", a line is not returned, or either returned line is commented out, this is a finding. |
Fix Text (F-33182r568361_fix) |
---|
Configure RHEL 8 to not forward source-routed packets with the following commands: $ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0 $ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0 If "0" is not the system's all value then add or update the following lines in the appropriate file under "/etc/sysctl.d": net.ipv4.conf.all.accept_source_route=0 net.ipv6.conf.all.accept_source_route=0 |