RHEL 8 must not respond to Internet Control Message Protocol (ICMP) echoes sent to a broadcast address.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-230537	RHEL-08-040230	SV-230537r599732_rule		Medium

Description
Responding to broadcast ICMP echoes facilitates network mapping and provides a vector for amplification attacks. There are notable differences between Internet Protocol version 4 (IPv4) and Internet Protocol version 6 (IPv6). IPv6 does not implement the same method of broadcast as IPv4. Instead, IPv6 uses multicast addressing to the all-hosts multicast group. Refer to RFC4294 for an explanation of "IPv6 Node Requirements", which resulted in this difference between IPv4 and IPv6.

Description

Responding to broadcast ICMP echoes facilitates network mapping and provides a vector for amplification attacks. There are notable differences between Internet Protocol version 4 (IPv4) and Internet Protocol version 6 (IPv6). IPv6 does not implement the same method of broadcast as IPv4. Instead, IPv6 uses multicast addressing to the all-hosts multicast group. Refer to RFC4294 for an explanation of "IPv6 Node Requirements", which resulted in this difference between IPv4 and IPv6.

STIG	Date
Red Hat Enterprise Linux 8 Security Technical Implementation Guide	2020-11-25

Details

Check Text ( C-33206r568357_chk )
Verify RHEL 8 does not respond to ICMP echoes sent to a broadcast address. Note: If either IPv4 or IPv6 is disabled on the system, this requirement only applies to the active internet protocol version. Check the value of the "icmp_echo_ignore_broadcasts" variable with the following command: $ sudo sysctl net.ipv4.icmp_echo_ignore_broadcasts net.ipv4.icmp_echo_ignore_broadcasts = 1 If the returned line does not have a value of "1", a line is not returned, or the retuned line is commented out, this is a finding.

Check Text ( C-33206r568357_chk )

Verify RHEL 8 does not respond to ICMP echoes sent to a broadcast address.

Note: If either IPv4 or IPv6 is disabled on the system, this requirement only applies to the active internet protocol version.

Check the value of the "icmp_echo_ignore_broadcasts" variable with the following command:

$ sudo sysctl net.ipv4.icmp_echo_ignore_broadcasts

net.ipv4.icmp_echo_ignore_broadcasts = 1

If the returned line does not have a value of "1", a line is not returned, or the retuned line is commented out, this is a finding.

Fix Text (F-33181r568358_fix)
Configure RHEL 8 to not respond to IPv4 ICMP echoes sent to a broadcast address with the following command: $ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1 If "1" is not the system's default value then add or update the following line in the appropriate file under "/etc/sysctl.d": net.ipv4.icmp_echo_ignore_broadcasts=1