UCF STIG Viewer Logo

The RHEL 8 System must take appropriate action when an audit processing failure occurs.


Overview

Finding ID Version Rule ID IA Controls Severity
V-230390 RHEL-08-030040 SV-230390r599732_rule Medium
Description
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without this notification, the security personnel may be unaware of an impending failure of the audit capability, and system operation may be adversely affected. Audit processing failures include software/hardware errors, failures in the audit capturing mechanisms, and audit storage capacity being reached or exceeded. This requirement applies to each audit data storage repository (i.e., distinct information system component where audit records are stored), the centralized audit storage capacity of organizations (i.e., all audit data storage repositories combined), or both.
STIG Date
Red Hat Enterprise Linux 8 Security Technical Implementation Guide 2020-11-25

Details

Check Text ( C-33059r567916_chk )
Verify RHEL 8 takes the appropriate action when an audit processing failure occurs.

Check that RHEL 8 takes the appropriate action when an audit processing failure occurs with the following command:

$ sudo grep disk_error_action /etc/audit/auditd.conf

disk_error_action = HALT

If the value of the "disk_error_action" option is not "SYSLOG", "SINGLE", or "HALT", or the line is commented out, ask the system administrator to indicate how the system takes appropriate action when an audit process failure occurs. If there is no evidence of appropriate action, this is a finding.
Fix Text (F-33034r567917_fix)
Configure RHEL 8 to shut down by default upon audit failure (unless availability is an overriding concern).

Add or update the following line (depending on configuration "disk_error_action" can be set to "SYSLOG" or "SINGLE" depending on configuration) in "/etc/audit/auditd.conf" file:

disk_error_action = HALT

If availability has been determined to be more important, and this decision is documented with the ISSO, configure the operating system to notify system administration staff and ISSO staff in the event of an audit processing failure by setting the "disk_error_action" to "SYSLOG".